Okwu Mmalite
Alloys ndị a nwere ike ịrụ ọrụ n'oge okpomọkụ dị elu na nrụgide igwe, nakwa ebe achọrọ nkwụsi ike dị elu n'elu. Ha nwere ezigbo ike ịbanye na oxidation, a pụkwara imepụta ha n'ụdị dị iche iche. Enwere ike ime ka ha sie ike site na ike siri ike, ike ọrụ, na ike mmiri ozuzo.
A na-eji ihe ndị dị elu eme ihe dị iche iche iji nweta ihe achọrọ. A na-ekewa ha n'ime otu atọ dịka ihe ndị e ji kọbalt mee, ihe ndị e ji nickel mee, na ihe ndị e ji ígwè mee.
Ngwakọta Incoloy(r) 825 bụ ihe mgbakwunye nickel-iron-chromium austenitic nke a na-agbakwunye ya na ihe ndị ọzọ na-agwakọta iji melite ihe onwunwe ya na-eguzogide nchara kemịkalụ. Mpempe akwụkwọ data na-esonụ ga-enye nkọwa ndị ọzọ gbasara ngwakọta Incoloy(r) 825.
Ngwakọta Kemịkalụ
Tebụl na-esonụ na-egosi ihe mejupụtara kemịkalụ nke alloy Incoloy(r) 825
| Ihe | Ọdịnaya (%) |
| Nickel, Ni | 38-46 |
| Ígwè, Fe | 22 |
| Chromium, Cr | 19.5-23.5 |
| Molybdenum, Mo | 2.50-3.50 |
| Kọpa, Cu | 1.50-3.0 |
| Manganese, Mn | 1 |
| Titanium, Ti | 0.60-1.20 |
| Silikọn, Si | 0.50 |
| Aluminom, Al | 0.20 |
| Kabọn, C | 0.050 |
| Sọlfọ, S | 0.030 |
Ngwakọta Kemịkalụ
Tebụl na-esonụ na-egosi ihe mejupụtara kemịkalụ nke alloy Incoloy(r) 825.
| Ihe | Ọdịnaya (%) |
| Nickel, Ni | 38-46 |
| Ígwè, Fe | 22 |
| Chromium, Cr | 19.5-23.5 |
| Molybdenum, Mo | 2.50-3.50 |
| Kọpa, Cu | 1.50-3.0 |
| Manganese, Mn | 1 |
| Titanium, Ti | 0.60-1.20 |
| Silikọn, Si | 0.50 |
| Aluminom, Al | 0.20 |
| Kabọn, C | 0.050 |
| Sọlfọ, S | 0.030 |
Njirimara Anụ Ahụ
A na-enye ihe ndị dị na Incoloy(r) alloy 825 n'ime tebụl na-esonụ.
| Njirimara | Metric | Eze ukwu |
| Njupụta | 8.14 g/cm³ | 0.294 lb/in³ |
| Ebe agbaze | 1385°C | 2525°F |
Njirimara Mekaniki
A na-egosi njirimara mekaniki nke alloy Incoloy(r) 825 na tebụl na-esonụ.
| Njirimara | Metric | Eze ukwu |
| Ike nrụgide (a na-akpọnwụ) | 690 MPa | 100000 psi |
| Ike mmepụta (a na-akụnye ya) | 310 MPa | 45000 psi |
| Ogologo oge n'oge ezumike (a na-emechi tupu ule ahụ) | Pasentị iri anọ na ise | Pasentị iri anọ na ise |
Njirimara nke okpomọkụ
A kọwara ihe ndị metụtara okpomọkụ nke alloy Incoloy(r) 825 na tebụl na-esonụ.
| Njirimara | Metric | Eze ukwu |
| Mgbasa okpomọkụ na-arụ ọrụ nke ọma (na 20-100°C/68-212°F) | 14 µm/m°C | 7.78 µin/in°F |
| Ọkwa okpomọkụ | 11.1 W/mK | 77 BTU na/hr.ft².°F |
Aha Ndị Ọzọ
Aha ndị ọzọ nke yiri Incoloy(r) alloy 825 gụnyere:
- ASTM B163
- ASTM B423
- ASTM B424
- ASTM B425
- ASTM B564
- ASTM B704
- ASTM B705
- DIN 2.4858
Ọgwụgwọ Mmepụta na Okpomọkụ
Nhazi ọrụ
Enwere ike iji usoro igwe eji eme ihe nke a na-akpọ Incoloy(r) alloy 825 rụọ ọrụ site na iji usoro igwe eji eme ihe nke a na-akpọ alloy dabere na ígwè. A na-eji ihe na-eme ka mmiri dị jụụ eme ọrụ igwe. A na-eji ihe na-eme ka mmiri dị jụụ eme ọrụ igwe dị elu dịka igwe egweri, igwe egweri ma ọ bụ ịtụgharị.
Ịkpụpụta
Enwere ike iji usoro ọdịnala niile mepụta alloy Incoloy(r) 825.
Ịgbado ọkụ
A na-eji gas-tungsten arc welding, ihe mkpuchi ígwè-arc, gas-metal-arc welding, na usoro ịgbado ọkụ arc submerged, agbado ọkụ nke Incoloy(r) alloy 825.
Ọgwụgwọ Okpomọkụ
A na-agwọ Incoloy(r) alloy 825 site n'ịkụcha ya na 955°C (1750°F) wee jiri nwayọ gwọọ ya.
Ịkpụpụta
A na-emepụta ihe ...
Ọrụ Na-ekpo Ọkụ
A na-arụ ọrụ ọkụ na-ekpo ọkụ n'okpuru 927°C (1700°F) alloy 825.
Ọrụ Oyi
A na-eji ngwaọrụ nkịtị arụ ọrụ oyi na-arụ ọrụ na alloy Incoloy(r) 825.
Ịkwụsị Ịkwụsị
A na-eme ka ihe mkpuchi Incoloy(r) 825 dị ọkụ na 955°C (1750°F) wee jiri nwayọ nwayọ.
Ike siri ike
Ọrụ oyi na-eme ka ihe na-arụ ọrụ nke Incoloy(r) alloy 825 sie ike.
Ngwa
A na-eji Incoloy(r) alloy 825 eme ihe na ngwa ndị a:
- Ọkpọkọ mmepụta asịd
- Ụgbọ mmiri
- Ịtụ achịcha
- Ngwa usoro kemịkalụ.
