Tiùban capillary stàilinn gun staoin AISI Inconel 625
Raon saothrachaidh:
tiùb coil stàilinn gun smal
coil tiùb stàilinn gun smal
pìoban coil stàilinn gun smal
pìob coil stàilinn gun staoin
solaraichean tiùb coil stàilinn gun staoin
luchd-saothrachaidh tiùb coil stàilinn gun staoin
coil pìoba stàilinn gun staoin
Tha tiùb beag stàilinn gun staoin, capillary stàilinn gun staoin, air a chleachdadh gu farsaing ann an làimhseachadh meidigeach, snàithleach optaigeach, dèanamh peann, toraidhean tàthaidh dealanach, co-phàirtean càball solais, biadh, sean-fhasanta, bainne, deoch, bùth-leigheadaireachd agus bith-cheimigeachd, faodar diofar fhaid a thoirt seachad a rèir iarrtasan.
Tiùban capillary le toll as motha de 0.0158 òirleach, rim faighinn ann an raon farsaing de stàilinn gun smal. Tha fulangas teann aig tiùban capillary Sandvik, agus tha uachdar a-staigh nan tiùban saor bho ola, geir agus mìrean eile. Tha seo a’ dèanamh cinnteach, mar eisimpleir, gu bheil sruthadh leasaichte agus cothromach de lionntan is gasaichean bhon sensor chun an ionnstramaid tomhais.
Tha tiùban coiled stàilinn gun smal ri fhaighinn ann an raon de dhiofar chruthan toraidh a rèir riatanasan an neach-ceannach. Bidh Licancheng sihe stainless steel material a’ dèanamh thoraidhean tiùba tàthaichte agus gun fhàinne. Is iad na ìrean àbhaisteach 304 304L 316L (UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625) Tha ìrean eile de stàilinn gun smal ann an duplex agus superduplex agus aloidh nicil rim faighinn air iarrtas.
Trast-thomhas bho 3mm (0.118'') gu 25.4mm (1.00'') OD. Tiugh balla bho 0.5mm (0.020'') gu 3mm (0.118''). Faodar tiùban a thoirt seachad ann an staid pìob smachd stàilinn gun smal air a losgadh no air a obrachadh fuar.
Sònrachadh
| Brand | Liaocheng Sihe STEEL stainless |
| Tiughas | 0.1-2.0mm |
| Trast-thomhas | 0.3-20mm (fulangas: ±0.01mm) |
| Ìre gun staoin | 201,202,304,304L,316L,317L,321,310s,254mso,904L,2205,625 msaa. |
| Crìochnachadh Uachdar | Tha an taobh a-staigh agus an taobh a-muigh le chèile soilleir, glan, agus gun fhàinne, gun aodion. |
| Coitcheann | ASTM A269-2002.JIS G4305/ GB/T 12770-2002 GB/T12771-2002 |
| Fad | 200-1500m gach coil, no mar a dh’ fheumar don neach-ceannach |
| Meud stoc | 6*1mm, 8*0.5mm, 8*0.6mm, 8*0.8mm, 8*0.9mm, 8*1mm, 9.5*1mm, 10*1mm, msaa. |
| Teisteanas | ISO&BV |
| Dòigh pacaidh | Pocaichean fighte, pocannan plastaig msaa. |
| Raon tagraidh | air a chleachdadh gu farsaing ann an gnìomhachas bìdh, uidheam deochan, inneal leann, iomlaidear teas, siostam solarachaidh bainne / uisge, uidheam meidigeach lùth na grèine, uidheam meidigeach, itealain, aerospace, conaltradh, ola agus gnìomhachasan eile |
| Nota | Gabhar ri leubail OEM / ODM / Ceannaiche. |
| Meud Tiùb Coil Stàilinn gun Mheirg | ||||||||||||||||
| NÌ | Ìre | Meud | Brùthadh | Fad | ||||||||||||
| 1 | 316L, 304L, aloidh 304 625 825 2205 2507 | 1/8″ × 0.025″ | 3200 | 500-35000 | ||||||||||||
| 2 | 316L, 304L, aloidh 304 625 825 2205 2507 | 1/8″ × 0.035″ | 3200 | 500-35000 | ||||||||||||
| 3 | 316L, 304L, aloidh 304 625 825 2205 2507 | 1/4″ × 0.035″ | 2000 | 500-35000 | ||||||||||||
| 4 | 316L, 304L, aloidh 304 625 825 2205 2507 | 1/4″ × 0.049″ | 2000 | 500-35000 | ||||||||||||
| 5 | 316L, 304L, aloidh 304 625 825 2205 2507 | 3/8″ × 0.035″ | 1500 | 500-35000 | ||||||||||||
| 6 | 316L, 304L, aloidh 304 625 825 2205 2507 | 3/8″ × 0.049″ | 1500 | 500-35000 | ||||||||||||
| 7 | 316L, 304L, aloidh 304 625 825 2205 2507 | 1/2″ × 0.049″ | 1000 | 500-35000 | ||||||||||||
| 8 | 316L, 304L, aloidh 304 625 825 2205 2507 | 1/2″ × 0.065″ | 1000 | 500-35000 | ||||||||||||
| 9 | 316L, 304L, aloidh 304 625 825 2205 2507 | φ3mm × 0.7mm | 3200 | 500-35000 | ||||||||||||
| 10 | 316L, 304L, aloidh 304 625 825 2205 2507 | φ3mm × 0.9mm | 3200 | 500-35000 | ||||||||||||
| 11 | 316L, 304L, aloidh 304 625 825 2205 2507 | φ4mm × 0.9mm | 3000 | 500-35000 | ||||||||||||
| 12 | 316L, 304L, aloidh 304 625 825 2205 2507 | φ4mm × 1.1mm | 3000 | 500-35000 | ||||||||||||
| 13 | 316L, 304L, aloidh 304 625 825 2205 2507 | φ6mm × 0.9mm | 2000 | 500-35000 | ||||||||||||
| 14 | 316L, 304L, aloidh 304 625 825 2205 2507 | φ6mm × 1.1mm | 2000 | 500-35000 | ||||||||||||
| 15 | 316L, 304L, aloidh 304 625 825 2205 2507 | φ8mm × 1mm | 1800 | 500-35000 | ||||||||||||
| 16 | 316L, 304L, aloidh 304 625 825 2205 2507 | φ8mm × 1.2mm | 1800 | 500-35000 | ||||||||||||
| 17 | 316L, 304L, aloidh 304 625 825 2205 2507 | φ10mm × 1mm | 1500 | 500-35000 | ||||||||||||
| 18 | 316L, 304L, aloidh 304 625 825 2205 2507 | φ10mm × 1.2mm | 1500 | 500-35000 | ||||||||||||
| 19 | 316L, 304L, aloidh 304 625 825 2205 2507 | φ10mm × 2mm | 500 | 500-35000 | ||||||||||||
| 20 | 316L, 304L, aloidh 304 625 825 2205 2507 | φ12mm × 1.5mm | 500 | 500-35000 | ||||||||||||
| Clàran cuideam | ||||||||||||||||
| Tha taghadh an stuth iomchaidh airson loidhne smachd no stealladh ceimigeach sam bith an urra ris na suidheachaidhean obrachaidh agus làraich a tha ann. Gus cuideachadh leis an taghadh, tha na clàran a leanas a’ toirt seachad rangachadh cuideam a-staigh agus na factaran atharrachaidh airson raon de ghràdan is mheudan cumanta de phìoban gun smal agus tàthaichte le laser. | ||||||||||||||||
| An cuideam as àirde (P) airson TP 316L aig 100°F (38°C)1) | ||||||||||||||||
| Feuch an toir sibh sùil air na factaran atharrachaidh ìre is cruth toraidh gu h-ìosal. | ||||||||||||||||
| Trast-thomhas a-muigh, a-steach | Tiughas balla, ann an òirlich. | Cuideam obrach2) | Bruthadh spreadhaidh2) | Bruthadh-tuiteam4) | ||||||||||||
| psi (MPa) | psi (MPa) | psi (MPa) | ||||||||||||||
| 1/4 | 0.035 | 6,600 (46) | 22,470 (155) | 6,600 (46) | ||||||||||||
| 1/4 | 0.049 | 9,260 (64) | 27,400 (189) | 8,710 (60) | ||||||||||||
| 1/4 | 0.065 | 12,280 (85) | 34,640 (239) | 10,750 (74) | ||||||||||||
| 3/8 | 0.035 | 4,410 (30) | 19,160 (132) | 4,610 (32) | ||||||||||||
| 3/8 | 0.049 | 6,170 (43) | 21,750 (150) | 6,220 (43) | ||||||||||||
| 3/8 | 0.065 | 8,190 (56) | 25,260 (174) | 7,900 (54) | ||||||||||||
| 3/8 | 0.083 | 10,450 (72) | 30,050 (207) | 9,570 (66) | ||||||||||||
| 1/2 | 0.049 | 4,630 (32) | 19,460 (134) | 4,820 (33) | ||||||||||||
| 1/2 | 0.065 | 6,140 (42) | 21,700 (150) | 6,200 (43) | ||||||||||||
| 1/2 | 0.083 | 7,840 (54) | 24,600 (170) | 7,620 (53) | ||||||||||||
| 5/8 | 0.049 | 3,700 (26) | 18,230 (126) | 3,930 (27) | ||||||||||||
| 5/8 | 0.065 | 4,900 (34) | 19,860 (137) | 5,090 (35) | ||||||||||||
| 5/8 | 0.083 | 6,270 (43) | 26,910 (151) | 6,310 (44) | ||||||||||||
| 3/4 | 0.049 | 3,080 (21) | 17,470 (120) | 3,320 (23) | ||||||||||||
| 3/4 | 0.065 | 4,090 (28) | 18,740 (129) | 4,310 (30) | ||||||||||||
| 3/4 | 0.083 | 5,220 (36) | 20,310 (140) | 5,380 (37) | ||||||||||||
| 1) Tuairmsean a-mhàin. Bu chòir cuideaman fìor a thomhas a’ beachdachadh air na factaran cuideam uile san t-siostam. | ||||||||||||||||
| 2) Stèidhichte air àireamhachadh bho API 5C3, a’ cleachdadh fulangas balla de +/-10% | ||||||||||||||||
| 3) Stèidhichte air àireamhachadh spreadhaidh neart deireannach bho API 5C3 | ||||||||||||||||
| 4) Stèidhichte air àireamhachadh crìonadh neart toraidh bho API 5C3 | ||||||||||||||||
| Factaran atharrachaidh airson crìochan cuideam obrach1) | ||||||||||||||||
| Pw = ìre cuideam obrach iomraidh airson TP 316L aig 100°F (38°C). Gus cuideam obrach a dhearbhadh airson measgachadh ìre/teòthachd, iomadaich Pw leis an fhactar atharrachaidh. | ||||||||||||||||
| Ìre | 100°F | 200°F | 300°F | 400°F | ||||||||||||
| (38°C) | (93°C) | (149°C) | (204°C) | |||||||||||||
| TP 316L, gun fhàinne | 1 | 0.87 | 0.7 | 0.63 | ||||||||||||
| TP 316L, tàthaichte | 0.85 | 0.74 | 0.6 | 0.54 | ||||||||||||
| Alloy 825, gun fhàinne | 1.33 | 1.17 | 1.1 | 1.03 | ||||||||||||
| Alloy 825, tàthaichte | 1.13 | 1.99 | 1.94 | 0.88 | ||||||||||||
| 1) Factaran atharrachaidh stèidhichte air cuideam ceadaichte ann an ASME. | ||||||||||||||||
| Factaran atharrachaidh airson crìochan cuideam spreadhaidh1) | ||||||||||||||||
| Pb = cuideam spreadhaidh iomraidh airson TP 316L aig 100°F. Gus cuideam spreadhaidh a dhearbhadh airson measgachadh ìre/teòthachd, iomadaich Pb leis an fhactar atharrachaidh. | ||||||||||||||||
| Ìre | 100°F | 200°F | 300°F | 400°F | ||||||||||||
| (38°C) | (93°C) | (149°C) | (204°C) | |||||||||||||
| TP 316L, gun fhàinne | 1 | 0.93 | 0.87 | 0.8 | ||||||||||||
| TP 316L, tàthaichte | 0.85 | 0.79 | 0.74 | 0.68 | ||||||||||||
| Alloy 825, gun fhàinne | 1.13 | 1.07 | 1 | 0.87 | ||||||||||||
| Alloy 825, tàthaichte | 0.96 | 0.91 | 0.85 | 0.74 | ||||||||||||
| 1) Factaran atharrachaidh stèidhichte air neart deireannach ann an ASME. | ||||||||||||||||
▼Pìoban coileach stàilinn gun staoin / pìoban coileach ìre stuth:
| Na Stàitean Aonaichte | A' GHEARMAILT | A' GHEARMAILT | AN FHRAING | IAPAN | AN EADAILT | AN T-SUAIN | RA | an EU | AN SPAINN | AN RUIS |
| AISI | DIN 17006 | WN 17007 | AFNOR | JIS | AONAICH | SIS | BSI | EURONORM | ||
| 201 | SUS 201 | |||||||||
| 301 | X 12 CrNi 17 7 | 1.4310 | Z 12 CN 17-07 | SUS 301 | X 12 CrNi 1707 | 23 31 | 301S21 | X 12 CrNi 17 7 | X 12 CrNi 17-07 | |
| 302 | X 5 CrNi 18 7 | 1.4319 | Z 10 CN 18-09 | SUS 302 | X 10 CrNi 1809 | 23 31 | 302S25 | X 10 CrNi 18 9 | X 10 CrNi 18-09 | 12KH18N9 |
| 303 | X 10 CrNiS 18 9 | 1.4305 | Z 10 CNF 18-09 | SUS 303 | X 10 CrNiS 1809 | 23 46 | 303S21 | X 10 CrNiS 18 9 | X 10 CrNiS 18-09 | |
| 303 Se | Z 10 CNF 18-09 | SUS 303 Se | X 10 CrNiS 1809 | 303S41 | X 10 CrNiS 18-09 | 12KH18N10E | ||||
| 304 | X 5 CrNi 18 10 X 5 CrNi 18 12 | 1.4301 1.4303 | Z 6 CN 18-09 | SUS 304 | X 5 CrNi 1810 | 23 32 | 304S15 304S16 | X 6 CrNi 18 10 | X 6 CrNi 19-10 | 08KH18N10 06KH18N11 |
| 304 N | SUS 304N1 | X 5 CrNiN 1810 | ||||||||
| 304 H | SUS F 304H | X 8 CrNi 1910 | X 6 CrNi 19-10 | |||||||
| 304 L | X2 CrNi1811 | 1.4306 | Z 2 CN 18-10 | SUS 304L | X 2 CrNi 1911 | 23 52 | 304S11 | X3 CrNi1810 | X2 CrNi 19-10 | 03KH18N11 |
| X 2 CrNiN 18 10 | 1.4311 | Z 2 CN 18-10-Az | SUS 304LN | X 2 CrNiN 1811 | 23 71 | |||||
| 305 | Z 8 CN 18-12 | SUS 305 | X 8 CrNi 1812 | 23 33 | 305S19 | X8 CrNi1812 | X8 CrNi 18-12 | |||
| Z 6 CNU 18-10 | SUS XM7 | X 6 CrNiCu 18 10 4 Kd | ||||||||
| 309 | X 15 CrNiS 20 12 | 1.4828 | Z 15 CN 24-13 | SUH 309 | X 16 CrNi 2314 | 309S24 | X 15 CrNi 23 13 | |||
| 309 S | SUS 309S | X6 CrNi 2314 | X 6 CrNi 22 13 | |||||||
| 310 | X 12 CrNi 25 21 | 1.4845 | SUH 310 | X 22 CrNi 2520 | 310S24 | 20KH23N18 | ||||
| 310 S | X 12 CrNi 25 20 | 1.4842 | Z 12 CN 25-20 | SUS 310S | X 5 CrNi 2520 | 23 61 | X 6 CrNi 25 20 | 10KH23N18 | ||
| 314 | X 15 CrNiSi 25 20 | 1.4841 | Z 12 CNS 25-20 | X 16 CrNiSi 2520 | X 15 CrNiSi 25 20 | 20KH25N20S2 | ||||
| 316 | X 5 CrNiMo 17 12 2 | 1.4401 | Z 6 CND 17-11 | SUS 316 | X 5 CrNiMo 1712 | 23 47 | 316S31 | X 6 CrNiMo 17 12 2 | X 6 CrNiMo 17-12-03 | |
| 316 | X 5 CrNiMo 17 13 3 | 1.4436 | Z 6 CND 17-12 | SUS 316 | X 5 CrNiMo 1713 | 23 43 | 316S33 | X 6 CrNiMo 17 13 3 | X 6 CrNiMo 17-12-03 | |
| 316 F | X 12 CrNiMoS 18 11 | 1.4427 | ||||||||
| 316 N | SUS 316N | |||||||||
| 316 U | SUS F 316H | X8 CrNiMo 1712 | X 5 CrNiMo 17-12 | |||||||
| 316 U | X8 CrNiMo 1713 | X 6 CrNiMo 17-12-03 | ||||||||
| 316 L | X 2 CrNiMo 17 13 2 | 1.4404 | Z 2 CND 17-12 | SUS 316L | X 2 CrNiMo 1712 | 23 48 | 316S11 | X3 CrNiMo 17 12 2 | X 2 CrNiMo 17-12-03 | 03KH17N14M2 |
| X 2 CrNiMoN 17 12 2 | 1.4406 | Z 2 CND 17-12-Az | SUS 316LN | X 2 CrNiMoN 1712 | ||||||
| 316 L | X 2 CrNiMo 18 14 3 | 1.4435 | Z 2 CND 17-13 | X2 CrNiMo 1713 | 23 53 | 316S13 | X 3 CrNiMo 17 13 3 | X 2 CrNiMo 17-12-03 | 03KH16N15M3 | |
| X 2 CrNiMoN 17 13 3 | 1.4429 | Z 2 CND 17-13-Az | X 2 CrNiMoN 1713 | 23 75 | ||||||
| X 6 CrNiMoTi 17 12 2 | 1.4571 | Z6 CNDT 17-12 | X 6 CrNiMoTi 1712 | 23 50 | 320S31 | X 6 CrNiMoTi 17 12 2 | X 6 CrNiMoTi 17-12-03 | 08KH17N13M2T 10KH17N13M2T | ||
| X 10 CrNiMoTi 18 12 | 1.4573 | X 6 CrNiMoTi 1713 | 320S33 | X 6 CrNiMoTI 17 13 3 | X 6 CrNiMoTi 17-12-03 | 08KH17N13M2T 10KH17N13M2T | ||||
| X 6 CrNiMoNb 17 12 2 | 1.4580 | Z 6 CNDNb 17-12 | X₆ CrNiMoNb 1712 | X 6 CrNiMoNb 17 12 2 | 08KH16N13M2B | |||||
| X 10 CrNiMoNb 18 12 | 1.4583 | X₆ CrNiMoNb 1713 | X 6 CrNiMoNb 17 13 3 | 09KH16N15M3B | ||||||
| 317 | SUS 317 | X 5 CrNiMo 1815 | 23 66 | 317S16 | ||||||
| 317 L | X 2 CrNiMo 18 16 4 | 1.4438 | Z 2 CND 19-15 | SUS 317L | X 2 CrNiMo 1815 | 23 67 | 317S12 | X3 CrNiMo 18 16 4 | ||
| 317 L | X 2 CrNiMo 18 16 4 | 1.4438 | Z 2 CND 19-15 | SUS 317L | X2 CrNiMo 1816 | 23 67 | 317S12 | X3 CrNiMo 18 16 4 | ||
| 330 | X 12 NiCrSi 36 16 | 1.4864 | Z 12NCS 35-16 | SUH 330 | ||||||
| 321 | X 6 CrNiTi 18 10 X 12 CrNiTi 18 9 | 1.4541 1.4878 | Z 6 CNT 18-10 | SUS 321 | X 6 CrNiTi 1811 | 23 37 | 321S31 | X 6 CrNiTi 18 10 | X 6 CrNiTi 18-11 | 08KH18N10T |
| 321 Uair | SUS 321H | X8 CrNiTi 1811 | 321S20 | X 7 CrNiTi 18-11 | 12KH18N10T | |||||
| 329 | X 8 CrNiMo 27 5 | 1.4460 | SUS 329J1 | 23 24 | ||||||
| 347 | X 6 CrNiNb 18 10 | 1.4550 | Z 6 CNNb 18-10 | SUS 347 | X 6 CrNiNb 1811 | 23 38 | 347S31 | X 6 CrNiNb 18 10 | X 6 CrNiNb 18-11 | 08KH18N12B |
| 347 Uair | SUS F 347H | X8 CrNiNb 1811 | X 7 CrNiNb 18-11 | |||||||
| 904L | 1.4939 | Z 12 CNDV 12-02 | ||||||||
| X 20 CrNiSi 25 4 | 1.4821 | |||||||||
| UNS31803 | X 2 CrNiMoN 22 5 | 1.4462 | ||||||||
| UNS32760 | X 3 CrNiMoN 25 7 | 1.4501 | Z 3 CND 25-06Az | |||||||
| 403 | X 6 Cr 13 X 10 Cr 13 X 15 Cr 13 | 1.4000 1.4006 1.4024 | Z 12 C 13 | SUS 403 | X 12 Cr 13 | 23 02 | 403S17 | X 10 Cr 13 X 12 Cr 13 | X 6 Cr 13 | 12Kh13 |
| 405 | X 6 CrAl 13 | 1.4002 | Z 6 CA 13 | SUS 405 | X 6 CrAl 13 | 405S17 | X 6 CrAl 13 | X 6 CrAl 13 | ||
| X 10 CrAl 7 | 1.4713 | Z 8 CA 7 | X 10 CrAl 7 | |||||||
| X 10 CrAl 13 | 1.4724 | X 10 CrAl 12 | 10Kh13SYu | |||||||
| X 10 CrAl 18 | 1.4742 | X 10 CrSiAl 18 | 15Kh18SYu | |||||||
| 409 | X 6 CrTi 12 | 1.4512 | Z 6 CT 12 | SUH 409 | X 6 CrTi 12 | 409S19 | X 5 CrTi 12 | |||
| X2 CrTi 12 | ||||||||||
| 410 | X 6 Cr 13 X 10 Cr 13 X 15 Cr 13 | 1.4000 1.4006 1.4024 | Z 10 C 13 Z 12 C 13 | SUS 410 | X 12 Cr 13 | 23 02 | 410S21 | X 12 Cr 13 | X 12 Cr 13 | 12Kh13 |
| 410 S | X 6 Cr 13 | 1.4000 | Z 6 C 13 | SUS 410S | X 6 Cr 13 | 23 01 | 403S17 | X 6 Cr 13 | 08Kh13 | |
| 414 |
Factaraidh
Buannachd càileachd:
Tha càileachd ar bathar airson an loidhne smachd ann an roinn na h-ola is a’ ghasa air a dhearbhadh chan ann a-mhàin rè a’ phròiseas saothrachaidh fo smachd ach cuideachd tro dheuchainn air bathar crìochnaichte. Am measg nan deuchainnean àbhaisteach tha:
1. Deuchainnean neo-sgriosail
2. Deuchainnean uisge-statach
3. Smachdan crìochnachaidh uachdar
4. Tomhaisean cruinneas tomhasach
5. Deuchainnean lasair is cònaidh
6. Deuchainn air feartan meacanaigeach agus ceimigeach
Tiùb cailleach tagraidh
1) Gnìomhachas innealan meidigeach
2) smachd teothachd gnìomhachais le stiùireadh teòthachd, mothachairean air an cleachdadh le pìob, teirmiméadar tiùba
3) Tiùb cridhe gnìomhachas cùram peann
4) antenna meanbh-tiùba, diofar sheòrsaichean antenna stàilinn gun smal beag mionaideach
5) Le measgachadh de chaipileidean stàilinn gun smal dealanach le trast-thomhas beag
6) Punch snàthaid seudraidh
7) Uaireadairean, dealbh
8) Tiùb antenna càr, antennas bàr a’ cleachdadh phìoban, tiùb antenna
9) Uidheam gràbhaladh leusair gus tiùb stàilinn gun smal a chleachdadh
10) Uidheam iasgaich, goireasan, Yugan a-mach le seilbh air
11) Daithead le capillary stàilinn gun smal
12) a h-uile seòrsa peann-làimhe fòn-làimhe peann-làimhe coimpiutair
13) Gnìomhachas phìoban teasachaidh, gnìomhachas ola
14) Clò-bhualadairean, snàthad bogsa sàmhach
15) Tarraing tiùb stàilinn gun smal leaghte dùbailte a thathas a’ cleachdadh ann an uinneagan ceangailte
16) Measgachadh de phìoban stàilinn gun smal gnìomhachais le trast-thomhas beag
17) Sgaoileadh mionaideach le snàthaidean stàilinn gun smal
18) Micreofon, fònaichean-cluaise agus micreofon gus tiùb stàilinn gun smal a chleachdadh, agus mar sin air adhart
Toraidhean co-cheangailte
-
Caipeil stàilinn gun smal Inconel 625 (UNS N06625)...
Raon saothrachaidh: tiùb coil stàilinn gun staoin tiùb stàilinn gun staoin coil tiùb coil stàilinn gun staoin pìob coil stàilinn gun staoin solaraichean tiùb coil stàilinn gun staoin luchd-saothrachaidh tiùb coil stàilinn gun staoin pìob stàilinn gun staoin coil stàilinn gun staoin capillary stàilinn gun staoin, tha tiùb beag stàilinn gun staoin air a chleachdadh gu farsaing ann an làimhseachadh meidigeach, snàithleach optigeach, dèanamh peann, toraidhean tàthaidh dealanach, co-bhanntachd càball solais, biadh, sean-fhasanta, bainne, deoch, bùth-leigheadaireachd agus bith-cheimigeachd, faodar diofar fhaid a thoirt seachad a rèir ath...
-
ASTM Alloy 625 Stàilinn gun staoin Coiled pìoban Coiled Co ...
Tha companaidh earranta Liaocheng sihe stainless steel material na neach-dèanamh phìoban stàilinn gun staoin, a’ dèanamh phìoban stàilinn gun staoin, nam measg Inconel 625 Tubing, is iad sin na pìoban alloy àrd-choileanaidh. Tha pìoban alloy 625 nan stuth le strì sàr-mhath an aghaidh sgàineadh, sgoltadh agus creimeadh. Tha pìoban nicil 625 gu math seasmhach ann an raon farsaing de dh’aigéid organach is mèinnearach. Neart math aig teòthachd àrd. Tha na pìoban seo gu math seasmhach an aghaidh oxidation aig teòthachd àrd...
