Takardar Bakin Karfe da Nau'in - Samfurin Nau'in 410
Takardar Bakin Karfeda kuma Coil - Nau'in Samfurin 410
Ana kiran farantin bakin karfe da farantin karfe da ƙarfe mai jure tsatsa domin ba ya yin tabo, ko tsatsa kamar ƙarfen carbon na yau da kullun. farantin bakin karfe da farantin karfe cikakke ne don amfani da shi wanda ke buƙatar ƙarfe ya sami halayen hana tsatsa.
Kayayyakin bakin karfe:
bakin karfe nada bututu
bakin karfe bututu nada
bututun nada bakin karfe
bakin karfe bututu nada
masu samar da bututun bakin karfe
masana'antun bututun ƙarfe na nada bakin karfe
bakin karfe bututu nada
Bayanin Layin Samfuri
An yi wa ado da Cold Rolled, An rufe shi da fenti mai lamba 2B
· Haka kuma ana iya yin kayan daki:
Lamba ta 3 - An goge gefe ɗaya ko biyu
Lamba ta 4 - An goge gefe ɗaya ko biyu
Ba Magnetic ba (Na iya zama ɗan maganadisu idan aka yi amfani da shi a sanyi)
· An rufe takarda da abin rufe fuska na vinyl ko na takarda mai hade da juna:
Ma'auni 22 da Nauyi
ASTM A240/A480 ASME SA-240
ASTM A262 Practice E
Haɗin Sinadaran Bakin Karfe 410
| Matsayi | C | Mn | Si | P | S | Cr | MO | Ni | N | |
| 410 | minti. | – | – | – | – | – | 11.5 | – | – | – |
| matsakaicin | 0.15 | 1.0 | 1.0 | 0.040 | 0.030 | 13.5 | 0.75 | – | ||
Bakin Karfe 410 Kayan Aikin Inji
| Matsayi | Ƙarfin Tashin Hankali (MPa) min | Ƙarfin Yawa: 0.2% Shaida (MPa) min | Ƙarawa (% a cikin 50mm) minti | Tauri | |
| Rockwell B (HR B) matsakaicin | Brinell (HB) mafi girma | ||||
| 410 | 480 | 275 | 16 | 92 | 201 |
Bakin Karfe 410 na Jiki
| Matsayi | Yawan yawa (kg/m3) | Modulus Mai Ragewa (GPa) | Matsakaicin Ma'aunin Faɗaɗawar Zafi (m/m/0C) | Tsarin isar da zafi (W/mK) | Takamaiman Zafi 0-1000C (J/kg.K) | Juriyar Wutar Lantarki (nm) | |||
| 0-1000C | 0-3150C | 0-5380C | a 1000C | a 5000C | |||||
| 410 | 7750 | 200 | 9.9 | 11.4 | 11.6 | 24.9 | 28.7 | 460 | 570 |
Daidaitattun maki don Bakin Karfe 410
| MAS'ALA | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 410 | 1.4006 | S41000 | SUS 410 | – | – | – | – |
Kayayyakin Bakin Karfe 410
Aikace-aikace:
- Motoci masu sauri, bas, jiragen sama, kwantena na kaya
- Maɓuɓɓugan retractor
- Maƙallan tiyo
- Masu jigilar kaya
- Injin kwalba
- Kayan Ado
- Tasoshin ruwa da abubuwan da aka gyara
- Bututun da ke aiki tukuru
- Faɗaɗa sassan ƙarfe
- Kwano na gauraya
- Masu busar da kaya
- Sassan murhu
- Masu musayar zafi
- Kayan aikin niƙa takarda
- Kayan aikin tace mai
- Masana'antar yadi
- Kayan aikin rini
- Sassan injin jet
- Tankunan ajiya masu walda don sinadarai masu rai
- Dakunan ƙona wuta
- Tallafin baka na tanda
- Rufin murhu
- Bututun sarrafa hayaki
- Magudanar kwal
- Sassan ma'auni
- Kayan dafa abinci
- Ƙoƙon kifi
- Gilashi masu ƙyalli
- Rumbunan ajiya na banki
- Maƙallan
- Skewers
- Masana'antar kiwo
- Kayan aikin sarrafa ƙonewa da hayaki
- Masu gyarawa
- Bututu, bututu
Siffofi
1 kayayyakitakardar bakin karfe/Farare
abu 2201, 202, 304, 304L, 316, 316L, 309S, 310S, 317L, 321, 409, 409L, 410, 420, 430, da sauransu
3saman2B, BA, HL, 4K, 6K, 8KNO. 1, NO. 2, NO. 3, NO. 4, NO. 5, da sauransu
4 misaliAISI, ASTM, DIN, EN, GB, JIS, da dai sauransu
5 ƙayyadaddun bayanai
(1) kauri: 0.3mm-100mm
(2) faɗi: 1000mm, 1250mm, 1500mm, 1800mm, 2000mm, da sauransu
(3) tsayi: 2000mm2440mm, 3000mm, 6000mm, da sauransu
(4) Ana iya samar da ƙayyadaddun bayanai kamar yadda abokan ciniki ke buƙata.
Aikace-aikace 6
(1) Gine-gine, ado
(2) masana'antar mai, sinadarai
(3) kayan lantarki, motoci, jiragen sama
(4) kayan gida, kayan kicin, kayan yanka, kayan abinci
(5) kayan aikin tiyata
fa'idodi 7
(1) Ingancin saman mai kyau, tsabta, da santsi gamawa
(2) Kyakkyawan juriya ga tsatsa, juriya fiye da ƙarfe na yau da kullun
(3) Babban ƙarfi da kuma canza siffar
(4) Ba shi da sauƙin shafawa ta hanyar oxidizing
(5) Kyakkyawan aikin walda
(6) Amfani da bambancin ra'ayi
Kunshin 8
(1) Ana naɗe samfuran kuma ana yi musu lakabi bisa ga ƙa'ida
(2) Dangane da buƙatun abokan ciniki
Isarwa 9cikin kwanaki 20 na aiki tunda mun sami kuɗin ajiya, galibi gwargwadon adadin ku da hanyoyin sufuri.
Biyan kuɗi 10T/T, L/C
jigilar kaya 11FOB/CIF/CFR
Yawan aiki 12Tan 500/wata
13 BayaniZa mu iya samar da wasu samfuran a matsayin buƙatun abokan ciniki.
Daidaitacce & Kayan Aiki
1 ASTM A240 Standard
201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 4104 30S
2 ASTM A480 Standard
302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H, 347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S32101, S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974
3 JIS 4304-2005 StandardSUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630
4 JIS G4305 Standard
SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347 SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A
Maganin saman
| Itme | Kammalawa a saman | Hanyoyin kammala saman | Babban aikace-aikacen |
| LAMBA. 1 | HR | Maganin zafi bayan birgima mai zafi, pickling, ko tare da magani | Domin ba tare da manufar sheki na saman ba |
| Lambar 2D | Ba tare da SPM ba | Hanyar maganin zafi bayan birgima mai sanyi, na'urar birgima mai ɗanɗano da ulu ko kuma daga ƙarshe mai jujjuyawa mai laushi mai laushi ta hanyar sarrafa saman matte | Kayan aiki na gabaɗaya, kayan gini. |
| Lambar.2B | Bayan SPM | Bayar da kayan sarrafawa na lamba 2 hanyar da ta dace ta haskaka hasken sanyi | Kayan aiki na yau da kullun, kayan gini (yawancin kayan ana sarrafa su) |
| BA | Mai haske mai haske | Maganin zafi mai haske bayan birgima mai sanyi, domin ya zama mai haske da tasirin haske mai sanyi | Sassan motoci, kayan aikin gida, motoci, kayan aikin likita, kayan aikin abinci |
| LAMBA. 3 | Sarrafa hatsi mai sheƙi da kauri | Belin niƙa mai gogewa mai lamba 100-120 na NO.2D ko NO.2B | Kayan gini, kayan kicin |
| LAMBA.4 | Bayan CPL | Belin niƙa mai gogewa mai lamba 150-180 na NO.2D ko NO.2B | Kayan gini, kayan kicin, motoci, kayan aikin likita, kayan abinci |
| 240# | Niƙa layuka masu laushi | Belin niƙa mai gogewa na NO.2D ko NO.2B mai sarrafa katako mai gogewa 240 mai gogewa | Kayan kicin |
| 320# | Fiye da layuka 240 na niƙa | Belin niƙa mai gogewa na NO.2D ko NO.2B mai sarrafa katako mai gogewa 320 mai gogewa | Kayan kicin |
| 400# | Kusa da hasken BA | Hanyar goge ƙafafun katako na MO.2B 400 | Kayan gini, kayan kicin |
| Layukan gashi (HL) | Layin gogewa yana da dogon aiki mai ci gaba | A cikin girman da ya dace (galibi mafi yawan lokuta Lamba 150-240 grit) tef ɗin goge gashi har tsawon gashi, yana da hanyar sarrafa layin goge gashi akai-akai. | Mafi yawan sarrafa kayan gini |
| LAMBA.6 | NO.4 yana sarrafa ƙasa da na gani, da kuma ƙarewa | Kayan sarrafawa na NO.4 da ake amfani da su wajen goge gogewar Tampico | Kayan gini, kayan ado |
| LAMBA.7 | Tsarin madubin haske mai cikakken daidaito | Lamba ta 600 ta buff mai juyawa tare da gogewa | Kayan gini, kayan ado |
| LAMBA.8 | Mafi girman madubi mai haske | Ƙwayoyin ƙanana na kayan abrasive domin yin polishing, yin madubi da polishing | Kayan gini, kayan ado, madubai |
NA ƘASASHE
| Amurka | JAMUS | JAMUS | FARSA | JAPAN | ITALIYA | SWIDAN | Birtaniya | Tarayyar Turai (EU) | SPAIN | RASHIYA |
| AISI | DIN 17006 | WN 17007 | AFNOR | JIS | Jami'ar UNI | SIS | BSI | EURONORM | UNE | GOST |
| 201 | SUS 201 | |||||||||
| 301 | X 12 CrNi 17 7 | 1.431 | Z 12 CN 17-07 | SUS 301 | X 12 CrNi 1707 | 23 31 | 301S21 | X 12 CrNi 17 7 | X 12 CrNi 17-07 | |
| 302 | X 5 CrNi 18 7 | 1.4319 | Z 10 CN 18-09 | SUS 302 | X 10 CrNi 1809 | 23 31 | 302S25 | X 10 CrNi 18 9 | X 10 CrNi 18-09 | 12KH18N9 |
| 303 | X 10 CrNiS 18 9 | 1.4305 | Z 10 CNF 18-09 | SUS 303 | X 10 CrNiS 1809 | 23 46 | 303S21 | X 10 CrNiS 18 9 | X 10 CrNiS 18-09 | |
| 303 Se | Z 10 CNF 18-09 | SUS 303 Se | X 10 CrNiS 1809 | 303S41 | X 10 CrNiS 18-09 | 12KH18N10E | ||||
| 304 | X 5 CrNi 18 10 | 1.4301 | Z 6 CN 18-09 | SUS 304 | X 5 CrNi 1810 | 23 32 | 304S15 | X 6 CrNi 18 10 | X 6 CrNi 19-10 | 08KH18N10 |
| X 5 CrNi 18 12 | 1.4303 | 304S16 | 06KH18N11 | |||||||
| 304 N | SUS 304N1 | X 5 CrNiN 1810 | ||||||||
| 304 H | SUS F 304H | X 8 CrNi 1910 | X 6 CrNi 19-10 | |||||||
| 304 L | X 2 CrNi 18 11 | 1.4306 | Z 2 CN 18-10 | SUS 304L | X 2 CrNi 1911 | 23 52 | 304S11 | X 3 CrNi 18 10 | X 2 CrNi 19-10 | 03KH18N11 |
| X 2 CrNiN 18 10 | 1.4311 | Z 2 CN 18-10-Az | SUS 304LN | X 2 CrNiN 1811 | 23 71 | |||||
| 305 | Z 8 CN 18-12 | SUS 305 | X 8 CrNi 1812 | 23 33 | 305S19 | X 8 CrNi 18 12 | X 8 CrNi 18-12 | |||
| Z 6 CNU 18-10 | SUS XM7 | X 6 CrNiCu 18 10 4 Kd | ||||||||
| 309 | X 15 CrNiS 20 12 | 1.4828 | Z 15 CN 24-13 | SUH 309 | X 16 CrNi 2314 | 309S24 | X 15 CrNi 23 13 | |||
| 309 S | SUS 309S | X 6 CrNi 2314 | X 6 CrNi 22 13 | |||||||
| 310 | X 12 CrNi 25 21 | 1.4845 | SUH 310 | X 22 CrNi 2520 | 310S24 | 20KH23N18 | ||||
| 310 S | X 12 CrNi 25 20 | 1.4842 | Z 12 CN 25-20 | SUS 310S | X 5 CrNi 2520 | 23 61 | X 6 CrNi 25 20 | 10KH23N18 | ||
| 314 | X 15 CrNiSi 25 20 | 1.4841 | Z 12 CNS 25-20 | X 16 CrNiSi 2520 | X 15 CrNiSi 25 20 | 20KH25N20S2 | ||||
| 316 | X 5 CrNiMo 17 12 2 | 1.4401 | Z 6 CND 17-11 | SUS 316 | X 5 CrNiMo 1712 | 23 47 | 316S31 | X 6 CrNiMo 17 12 2 | X 6 CrNiMo 17-12-03 | |
| 316 | X 5 CrNiMo 17 13 3 | 1.4436 | Z 6 CND 17-12 | SUS 316 | X 5 CrNiMo 1713 | 23 43 | 316S33 | X 6 CrNiMo 17 13 3 | X 6 CrNiMo 17-12-03 | |
| 316 F | X 12 CrNiMoS 18 11 | 1.4427 | ||||||||
| 316 N | SUS 316N | |||||||||
| 316 H | SUS F 316H | X 8 CrNiMo 1712 | X 5 CrNiMo 17-12 | |||||||
| 316 H | X 8 CrNiMo 1713 | X 6 CrNiMo 17-12-03 | ||||||||
| 316 L | X 2 CrNiMo 17 13 2 | 1.4404 | Z 2 CND 17-12 | SUS 316L | X 2 CrNiMo 1712 | 23 48 | 316S11 | X 3 CrNiMo 17 12 2 | X 2 CrNiMo 17-12-03 | 03KH17N14M2 |
| X 2 CrNiMoN 17 12 2 | 1.4406 | Z 2 CND 17-12-Az | SUS 316LN | X 2 CrNiMoN 1712 | ||||||
| 316 L | X 2 CrNiMo 18 14 3 | 1.4435 | Z 2 CND 17-13 | X 2 CrNiMo 1713 | 23 53 | 316S13 | X 3 CrNiMo 17 13 3 | X 2 CrNiMo 17-12-03 | 03KH16N15M3 | |
| X 2 CrNiMoN 17 13 3 | 1.4429 | Z 2 CND 17-13-Az | X 2 CrNiMoN 1713 | 23 75 | ||||||
| X 6 CrNiMoTi 17 12 2 | 1.4571 | Z6 CNDT 17-12 | X 6 CrNiMoTi 1712 | 23 50 | 320S31 | X 6 CrNiMoTi 17 12 2 | X 6 CrNiMoTi 17-12-03 | 08KH17N13M2T | ||
| 10KH17N13M2T | ||||||||||
| X 10 CrNiMoTi 18 12 | 1.4573 | X 6 CrNiMoTi 1713 | 320S33 | X 6 CrNiMoTI 17 13 3 | X 6 CrNiMoTi 17-12-03 | 08KH17N13M2T | ||||
| 10KH17N13M2T | ||||||||||
| X 6 CrNiMoNb 17 12 2 | 1.458 | Z 6 CNDNb 17-12 | X 6 CrNiMoNb 1712 | X 6 CrNiMoNb 17 12 2 | 08KH16N13M2B | |||||
| X 10 CrNiMoNb 18 12 | 1.4583 | X 6 CrNiMoNb 1713 | X 6 CrNiMoNb 17 13 3 | 09KH16N15M3B |
Kayayyaki masu alaƙa
-
Takardar Karfe ta AISI 304 Jerin Bakin Karfe Faranti
Takardar bakin karfe Kauri: 10mm-100mm & 0.3mm-2mm Faɗi: 1.2m, 1.5m ko kamar yadda aka buƙata Fasaha: Naɗewa da sanyi ko naɗewa da zafi Maganin saman: An goge ko kamar yadda ake buƙata Aikace-aikacen: Takardar ƙarfe ta shafi filin gini, masana'antar gine-gine ta jiragen ruwa, masana'antar mai da sinadarai, masana'antar yaƙi da wutar lantarki, sarrafa abinci da musayar zafi a cikin tukunyar jirgi da filayen kayan aiki da sauransu. Ma'aunin inganci: GB 3274-2007 ko daidai da ASTM/JIS/DIN/BS da sauransu. Matsayin ƙarfe: 200, 300...
-
AISI 304L Bakin karfe takardar
Babban Kayayyakin Kamfaninmu yana bayar da takardar bakin karfe mai lamba 304L Alloy 304L a jerin T-300 bakin karfe austenitic, wanda ke da akalla kashi 18% na chromium da kuma 8% na nickel. Nau'in 304L yana da matsakaicin carbon shine 0.030. Shine daidaitaccen "bakin karfe 18/8" wanda aka fi samu a cikin kwanoni da kayan girki. Alloys 304L shine mafi yawan amfani da kuma amfani da ƙarfe a cikin dangin bakin karfe. Ya dace da nau'ikan aikace-aikacen gida da na kasuwanci iri-iri, Alloys 304L yana nuna kyakkyawan juriya ga tsatsa...
-
Takardar Bakin Karfe ASTM 304 2B & Faranti
ASTM 304 2B Takardar Bakin Karfe & Faranti Liao cheng si he Kayan Bakin Karfe LTD na iya bayarwa Takardar Bakin Karfe & Faranti ASTM 304 2B Takardar Bakin Karfe Sau da yawa ana kiranta da ƙarfe mai jure tsatsa domin ba tabo, tsatsa ko tsatsa kamar ƙarfe na yau da kullun. Takardar Bakin Karfe & Faranti cikakke ne mafita mafi kyau ga aikace-aikacen da ke buƙatar ƙarfe ya sami halayen hana shaƙatawa. Aikace-aikacen Takardar Bakin Karfe & Faranti...
-
ASTM 316 #4 Takardar Bakin Karfe da Faranti
ASTM 316 #4 Takardar Bakin Karfe & Faranti Ana kiran takardar & faranti na bakin karfe da ƙarfe mai jure tsatsa saboda ba ya yin tabo, tsatsa ko tsatsa cikin sauƙi kamar ƙarfe na yau da kullun. Takardar & faranti na bakin karfe cikakke ne mafita don aikace-aikacen da ke buƙatar ƙarfe ya sami halayen hana shaƙatawa. Kayayyakin na'urar bakin karfe: bututun na'urar bakin karfe bututun na'urar bakin karfe bututun na'urar bakin karfe bututun na'urar bakin karfe bututun na'urar bakin karfe bututun na'urar bakin karfe bututun na'urar bakin karfe bututun na'urar bakin karfe...
