AISI Incoloy 825 warshad tuubbooyinka kaabadaha ah ee aan birta lahayn iyo soo saarayaasha |Sihe

AISI Incoloy 825 tuubooyinka kaabadaha ee birta ah

AISI Incoloy 825 tuubooyinka kaabadaha sida birta ah ee aan birta lahayn

Sharaxaad Gaaban:

1.Heerarka wax soo saarka: ASTM A269/A249

2.Stainless steel walxaha: 304 304L 316L (UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 N62

3. Baaxadda cabbirka: dhexroorka 3MM(0.118"-25.4(1.0")MM

4. Dhumucda darbiga: 0.5mm (0.020 '') ilaa 3mm (0.118 '')

5. Xaaladda tuubada gaarsiinta guud: nus adag / jilicsan annealing dhalaalaya

6.Xeerka dulqaadka: dhexroor: + 0.1mm, dhumucda derbiga: + 10%, dhererka: -0 / + 6mm

7.Coil dhererka ilaa: 500MM-13500MM (45000feet) (waxaa lagu hagaajin karaa si waafaqsan shuruudaha macaamiisha)

Email noogu soo dir U soo deji sidii PDF

Faahfaahinta Alaabta

Tags Product

Kala duwanaanshaha wax soo saarka:

tube gariiradda ahama
gariiradda birta ahama
tuubooyinka gariiradda birta ah oo aan lahayn
Dhuumaha gariiradda birta ah ee aan lahayn
alaab-qeybiyeyaasha tuubada gariiradda birta ah
soosaarayaasha tuubada gariiradda birta ah
gariiradda birta ahama

Qalabka birta ah ee birta ah, tuubo yar oo birta ah ayaa si weyn loogu isticmaalaa daawaynta, fiber-optic, qalin samaynta, alaabta alxanka elektarooniga ah, fiilada iftiinka iftiinka, cuntada, canabka, caanaha, cabitaanka, farmashiyaha iyo biochemistry, dherer kala duwan ayaa la bixin karaa iyadoo loo eegayo codsiyada

Tuubooyinka xididada leh ee ugu badnaan 0.0158 in., oo laga heli karo noocyo kala duwan oo bir ah.Tuubooyinka capillary Sandvik waxaa lagu gartaa dulqaad adag, iyo dusha gudaha ee tuubooyinka waa ka nadiifsan yihiin saliidda, dufanka iyo qaybaha kale.Tani waxay hubinaysaa, tusaale ahaan, qulqulka dareeraha iyo gaasaska la hagaajiyay iyo xitaa qulqulka dareeraha ilaa qalabka wax lagu cabbiro.

Tuubooyinka aan birta lahayn ee duuban waxaa lagu heli karaa noocyo kala duwan oo noocyo kala duwan oo alaabooyin ah iyadoo ku xiran shuruudaha macaamiisha.Licancheng sihe walxo birta aan lahayn waxay soo saartaa alaab alxan leh iyo alaab tuubo ah.Darajooyinka caadiga ah waa 304 304L 316L(UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N08825) Inconel 625 daawaha nikkel ayaa diyaar ah marka la codsado.

Dhexroorka 3mm (0.118 '') ilaa 25.4mm (1.00") OD.Dhumucdiisuna waxay ka bilaabataa 0.5mm (0.020 '') ilaa 3mm (0.118'') Tuubooyinka waxaa lagu bixin karaa meesha la tirtiray ama qabow ee la shaqeeyay xaalad birta koontaroolaysa xaalad tuubada.

Tilmaamid

Summada	Liaocheng Sihe Steel-ka Aan lahayn
Dhumucda	0.1-2.0mm
Dhexroorka	0.3-20mm (dulqaad: ± 0.01mm)
Fasalka aan lahayn	201,202,304,304L,316L,317L,321,310s,254mso,904L,2205,625 iwm.
Dhamaystir dusha sare	gudaha iyo dibaddaba labaduba waa xinjirro dhalaalaysa, nadiifin, oo aan kala go 'lahayn, wax daloolana ma jiraan.
Heerka	ASTM A269-2002.JIS G4305/ GB/T 12770-2002GB/T12771-2002
Dhererka	200-1500m halkii gariiradda, ama Sida macmiilka looga baahan yahay
Cabbirka kaydka	61mm,80.5mm,80.6mm,80.8mm,80.9mm,81mm, 9.51mm,101mm,ect..
Shahaado	ISO&BV
Habka xirxiran	Bacaha tolmada leh, bacaha balaastikada ah iwm.
Kala duwanaanshaha codsiga	si weyn loogu isticmaalo warshadaha cuntada, qalabka cabitaanka, mashiinka biirka, kulaylka, caanaha / nidaamka bixinta biyaha, qalabka caafimaadka tamarta qoraxda, qalabka caafimaadka, duulista, hawada, isgaarsiinta, saliidda iyo warshadaha kale
Ogow	OEM / ODM / Summada iibsada waa la aqbalay.

	Xajmiga tuubada gariiradda birta ah ee aan birta lahayn
	ITEM	Darajo					Cabbirka (MM)					Cadaadis (Mpa)			Dhererka (M)
	1	316L, 304L, 304 daawaha 625 825 2205 2507					1/8"×0.025"					3200			500-35000
	2	316L, 304L, 304 daawaha 625 825 2205 2507					1/8"×0.035"					3200			500-35000
	3	316L, 304L, 304 daawaha 625 825 2205 2507					1/4"×0.035"					2000			500-35000
	4	316L, 304L, 304 daawaha 625 825 2205 2507					1/4"×0.049"					2000			500-35000
	5	316L, 304L, 304 daawaha 625 825 2205 2507					3/8"×0.035"					1500			500-35000
	6	316L, 304L, 304 daawaha 625 825 2205 2507					3/8"×0.049"					1500			500-35000
	7	316L, 304L, 304 daawaha 625 825 2205 2507					1/2"×0.049"					1000			500-35000
	8	316L, 304L, 304 daawaha 625 825 2205 2507					1/2"×0.065"					1000			500-35000
	9	316L, 304L, 304 daawaha 625 825 2205 2507					φ3mm × 0.7mm					3200			500-35000
	10	316L, 304L, 304 daawaha 625 825 2205 2507					φ3mm × 0.9mm					3200			500-35000
	11	316L, 304L, 304 daawaha 625 825 2205 2507					φ4mm × 0.9mm					3000			500-35000
	12	316L, 304L, 304 daawaha 625 825 2205 2507					φ4mm × 1.1mm					3000			500-35000
	13	316L, 304L, 304 daawaha 625 825 2205 2507					φ6mm×0.9mm					2000			500-35000
	14	316L, 304L, 304 daawaha 625 825 2205 2507					φ6mm×1.1mm					2000			500-35000
	15	316L, 304L, 304 daawaha 625 825 2205 2507					φ8mm×1mm					1800			500-35000
	16	316L, 304L, 304 daawaha 625 825 2205 2507					φ8mm × 1.2mm					1800			500-35000
	17	316L, 304L, 304 daawaha 625 825 2205 2507					φ10mm×1mm					1500			500-35000
	18	316L, 304L, 304 daawaha 625 825 2205 2507					φ10mm × 1.2mm					1500			500-35000
	19	316L, 304L, 304 daawaha 625 825 2205 2507					φ10mm × 2mm					500			500-35000
	20	316L, 304L, 304 daawaha 625 825 2205 2507					φ12mm × 1.5mm					500			500-35000
Miisaska cadaadiska
Xulashada walxaha ku habboon ee kantaroolka la bixiyay ama khadka duritaanka kiimikada waxay ku xiran tahay xaaladaha hawlgalka iyo goobta.Si loo kaalmeeyo doorashada, jaantusyada soo socdaa waxay bixiyaan qiimaynta cadaadiska gudaha iyo arrimaha hagaajinta ee darajooyin kala duwan oo caadi ah iyo cabbirada tuubooyinka aan xidhnayn iyo laysarka alxanka leh.
Cadaadiska ugu badan (P) ee TP 316L at 100°F (38°C)1)
Fadlan tixraac qodobbada hagaajinta darajada iyo alaabta ee hoose.
Dhexroor ka baxsan, gudaha			Dhumucda gidaarka, gudaha	Cadaadiska shaqada2)				Cadaadiska dilaaca2)						Cadaadiska dumi4)
				psi (MPa)				psi (MPa)						psi (MPa)
1/4			0.035	6,600 (46)				22,470 (155)						6,600 (46)
1/4			0.049	9,260 (64)				27,400 (189)						8,710 (60)
1/4			0.065	12,280 (85)				34,640 (239)						10,750 (74)
3/8			0.035	4,410 (30)				19,160 (132)						4,610 (32)
3/8			0.049	6,170 (43)				21,750 (150)						6,220 (43)
3/8			0.065	8,190 (56)				25,260 (174)						7,900 (54)
3/8			0.083	10,450 (72)				30,050 (207)						9,570 (66)
1/2			0.049	4,630 (32)				19,460 (134)						4,820 (33)
1/2			0.065	6,140 (42)				21,700 (150)						6,200 (43)
1/2			0.083	7,840 (54)				24,600 (170)						7,620 (53)
5/8			0.049	3,700 (26)				18,230 (126)						3,930 (27)
5/8			0.065	4,900 (34)				19,860 (137)						5,090 (35)
5/8			0.083	6,270 (43)				26,910 (151)						6,310 (44)
3/4			0.049	3,080 (21)				17,470 (120)						3,320 (23)
3/4			0.065	4,090 (28)				18,740 (129)						4,310 (30)
3/4			0.083	5,220 (36)				20,310 (140)						5,380 (37)
1) Qiyaasta kaliya.Cadaadiska dhabta ah waa in la xisaabiyaa iyada oo la tixgelinayo dhammaan arrimaha walaaca ee nidaamka.
2) Iyada oo ku saleysan xisaabinta API 5C3, iyadoo la adeegsanayo dulqaadka derbiga +/- 10%
3) Iyada oo ku saleysan xisaabinta dillaaca xoogga ugu dambeeya ee API 5C3
4) Iyada oo ku saleysan xisaabinta burburka xoogga wax-soo-saarka ee API 5C3
Qodobbada hagaajinta ee xaddidaadda cadaadiska shaqada1)
Pw = tixraaca qiimaynta cadaadiska shaqada ee TP 316L at 100°F (38°C).Si loo go'aamiyo cadaadiska shaqada ee isku darka darajada/heerkulka, ku dhufo Pw qodobka hagaajinta.
Darajo			100°F			200°F				300°F			400°F
			(38°C)			(93°C)				(149°C)			(204°C)
TP 316L, aan toos ahayn			1			0.87				0.7			0.63
TP 316L, alxanka			0.85			0.74				0.6			0.54
Alloy 825, aan toos ahayn			1.33			1.17				1.1			1.03
Alloy 825, welded			1.13			1.99				1.94			0.88
1) Qodobbada hagaajinta ee ku salaysan cadaadiska la oggol yahay ee ASME.
Qodobbada hagaajinta ee xaddidaadda cadaadiska dillaaca1)
Pb = cadaadiska dillaaca tixraaca ee TP 316L at 100°F.Si loo go'aamiyo cadaadiska dilaaca ee isku darka darajada/heerkulka, ku dhufo Pb qodobka hagaajinta.
Darajo			100°F		200°F				300°F		400°F
			(38°C)		(93°C)				(149°C)		(204°C)
TP 316L, aan toos ahayn			1		0.93				0.87		0.8
TP 316L, alxanka			0.85		0.79				0.74		0.68
Alloy 825, aan toos ahayn			1.13		1.07				1		0.87
Alloy 825, welded			0.96		0.91				0.85		0.74
1) Qodobbada hagaajinta ee ku salaysan xoogga ugu dambeeya ee ASME.

▼Tuubooyinka birta duuban/tuubyada duuban darajada agabka:

USA	GERMANY	GERMANY	FRANCE	JAPAN	TALYAANIGA	SWEDEN	UK	EU	SPAIN	ruushka
AISI	DIN 17006	WN 17007	AFNOR	JIS	UNI	SIS	BSI	EURONORM
201				SUUS 201
301	X 12 CrNi 17 7	1.4310	Z 12 CN 17-07	SUS 301	X 12 CrNi 1707	23 31	301S21	X 12 CrNi 17 7	X 12 CrNi 17-07
302	X 5 CrNi 18 7	1.4319	Z 10 CN 18-09	SUS 302	X 10 CrNi 1809	23 31	302S25	X 10 CrNi 18 9	X 10 CrNi 18-09	12KH18N9
303	X 10 CrNiS 18 9	1.4305	Z 10 CNF 18-09	SUS 303	X 10 CrNiS 1809	23 46	303S21	X 10 CrNiS 18 9	X 10 CrNiS 18-09
303 Se			Z 10 CNF 18-09	SUS 303 Se	X 10 CrNiS 1809		303S41		X 10 CrNiS 18-09	12KH18N10E
304	X 5 CrNi 18 10 X 5 CrNi 18 12	1.4301 1.4303	Z 6 CN 18-09	SUS 304	X 5 CrNi 1810	23 32	304S15 304S16	X 6 CrNi 18 10	X 6 CrNi 19-10	08KH18N10 06KH18N11
304 N				SUS 304N1	X 5 CrNiN 1810
304 H				SUS F 304H	X 8 CrNi 1910kii				X 6 CrNi 19-10
304 L	X 2 CrNi 18 11	1.4306	Z 2 CN 18-10	SUS 304L	X 2 CrNi 1911	23 52	304S11	X 3 CrNi 18 10	X 2 CrNi 19-10	03KH18N11
	X 2 CrNiN 18 10	1.4311	Z 2 CN 18-10-As	SUS 304LN	X 2 CrNiN 1811	23 71
305			Z 8 CN 18-12	SUS 305	X 8 CrNi 1812	23 33	305S19	X 8 CrNi 18 12	X 8 CrNi 18-12
			Z 6 CNU 18-10	SUS XM7				X 6 CrNiCu 18 10 4 Kd
309	X 15 CrNiS 20 12	1.4828	Z 15 CN 24-13	SUH 309	X 16 CrNi 2314		309S24	X 15 CrNi 23 13
309 S				SUS 309S	X 6 CrNi 2314			X 6 CrNi 22 13
310	X 12 CrNi 25 21	1.4845		SUH 310	X 22 CrNi 2520		310S24			20KH23N18
310 S	X 12 CrNi 25 20	1.4842	Z 12 CN 25-20	SUS 310S	X 5 CrNi 2520	23 61		X 6 CrNi 25 20		10KH23N18
314	X 15 CrNiSi 25 20	1.4841	Z 12 CNS 25-20		X 16 CrNiSi 2520			X 15 CrNiSi 25 20		20KH25N20S2
316	X 5 CrNiMo 17 12 2	1.4401	Z 6 CND 17-11	SUUS 316	X 5 CrNiMo 1712	23 47	316S31	X 6 CrNiMo 17 12 2	X 6 CrNiMo 17-12-03
316	X 5 CrNiMo 17 13 3	1.4436	Z 6 CND 17-12	SUUS 316	X 5 CrNiMo 1713	23 43	316S33	X 6 CrNiMo 17 13 3	X 6 CrNiMo 17-12-03
316 F	X 12 CrNiMoS 18 11	1.4427
316 N				SUS 316N
316 H				SUUS F 316H	X 8 CrNiMo 1712				X 5 CrNiMo 17-12
316 H					X 8 CrNiMo 1713				X 6 CrNiMo 17-12-03
316 L	X 2 CrNiMo 17 13 2	1.4404	Z 2 CND 17-12	SUS 316L	X 2 CrNiMo 1712	23 48	316S11	X 3 CrNiMo 17 12 2	X 2 CrNiMo 17-12-03	03KH17N14M2

	X 2 CrNiMoN 17 12 2	1.4406	Z 2 CND 17-12-Az	SUS 316LN	X 2 CrNiMoN 1712
316 L	X 2 CrNiMo 18 14 3	1.4435	Z 2 CND 17-13		X 2 CrNiMo 1713	23 53	316S13	X 3 CrNiMo 17 13 3	X 2 CrNiMo 17-12-03	03KH16N15M3
	X 2 CrNiMoN 17 13 3	1.4429	Z 2 CND 17-13-Az		X 2 CrNiMoN 1713	23 75
	X 6 CrNiMoTi 17 12 2	1.4571	Z6 CNDT 17-12		X 6 CrNiMoTi 1712	23 50	320S31	X 6 CrNiMoTi 17 12 2	X 6 CrNiMoTi 17-12-03	08KH17N13M2T 10KH17N13M2T
	X 10 CrNiMoTi 18 12	1.4573			X 6 CrNiMoTi 1713		320S33	X 6 CrNiMoTI 17 13 3	X 6 CrNiMoTi 17-12-03	08KH17N13M2T 10KH17N13M2T
	X 6 CrNiMoNb 17 12 2	1.4580	Z 6 CNDNb 17-12		X 6 CrNiMoNb 1712			X 6 CrNiMoNb 17 12 2		08KH16N13M2B
	X 10 CrNiMoNb 18 12	1.4583			X 6 CrNiMoNb 1713			X 6 CrNiMoNb 17 13 3		09KH16N15M3B
317				SUUS 317	X 5 CrNiMo 1815	23 66	317S16
317 L	X 2 CrNiMo 18 16 4	1.4438	Z 2 CND 19-15	SUS 317L	X 2 CrNiMo 1815	23 67	317S12	X 3 CrNiMo 18 16 4
317 L	X 2 CrNiMo 18 16 4	1.4438	Z 2 CND 19-15	SUS 317L	X 2 CrNiMo 1816	23 67	317S12	X 3 CrNiMo 18 16 4
330	X 12 NiCrSi 36 16	1.4864	Z 12NCS 35-16	SUH 330
321	X 6 CrNiTi 18 10 X 12 CrNiTi 18 9	1.4541 1.4878	Z 6 CNT 18-10	SUUS 321	X 6 CrNiTi 1811	23 37	321S31	X 6 CrNiTi 18 10	X 6 CrNiTi 18-11	08KH18N10T
321 H				SUS 321H	X 8 CrNiTi 1811		321S20		X 7 CrNiTi 18-11	12KH18N10T
329	X 8 CrNiMo 27 5	1.4460		SUS 329J1		23 24
347	X 6 CrNiNb 18 10	1.4550	Z 6 CNNb 18-10	SUUS 347	X 6 CrNiNb 1811	23 38	347S31	X 6 CrNiNb 18 10	X 6 CrNiNb 18-11	08KH18N12B
347 H				SUUS F 347H	X 8 CrNiNb 1811				X 7 CrNiNb 18-11
904L		1.4939	Z 12 CNDV 12-02

	X 20 CrNiSi 25 4	1.4821
UNS31803	X 2CrNiMoN 22 5	1.4462
UNS32760	X 3 CrNiMoN 25 7	1.4501	Z 3 CND 25-06Az
403	X 6 Cr 13 X 10 Cr 13 X 15 Cr 13	1.4000 1.4006 1.4024	Z 12C 13	SUS 403	X 12 Cr 13	23 02	403S17	X 10 Cr 13 X 12 Cr 13	X 6 Cr 13	12Kh13
405	X 6 CrAl 13	1.4002	Z 6 CA 13	SUS 405	X 6 CrAl 13		405S17	X 6 CrAl 13	X 6 CrAl 13
	X 10 CrAl 7	1.4713	Z 8 CA 7					X 10 CrAl 7
	X 10 CrAl 13	1.4724			X 10 CrAl 12					10Kh13Syu
	X 10 CrAl 18	1.4742						X 10 CrSiAl 18		15Kh18Syu

409	X 6 CrTi 12	1.4512	Z 6 CT 12	SUH 409	X 6 CrTi 12		409S19	X 5 CrTi 12
					X 2 CrTi 12
410	X 6 Cr 13 X 10 Cr 13 X 15 Cr 13	1.4000 1.4006 1.4024	Z 10C 13 Z 12C 13	SUS 410	X 12 Cr 13	23 02	410S21	X 12 Cr 13	X 12 Cr 13	12Kh13
410 S	X 6 Cr 13	1.4000	Z 6C 13	SUS 410S	X 6 Cr 13	23 01	403S17	X 6 Cr 13		08Kh13
414

Warshada

Faa'iidada tayada:

Tayada alaabtayada ee xariiqda xakamaynta ee qaybta saliidda iyo gaaska ayaa la hubiyaa maaha oo kaliya inta lagu jiro habka wax soo saarka ee la xakameeyey laakiin sidoo kale habka tijaabada alaabta la dhammeeyey.Tijaabooyinka caadiga ah waxaa ka mid ah:

1.Tijaabooyin aan burburin

2. Tijaabooyinka Hydrostatic

3. Xakamaynta dusha sare

4. Qiyaasta saxnaanta cabbirka

5. Tijaabada dabka

6. Baarista makaanikada iyo kiimikada

Codsiga tuubada caillary

1) Warshadaha qalabka caafimaadka

2) Xakamaynta heerkulka warshadaha ee heerkulka hagayo, dareemayaasha loo isticmaalo tuubada, heerkulbeegga tuubada

3) Tuubbada udub-dhexaadka ah ee warshadaha daryeelka qalimaan

4) anteeno-tubo-yar, noocyo kala duwan oo anteeno bir ah oo yar oo sax ah

5) Iyada oo leh noocyo kala duwan oo elektiroonig ah oo dhexdhexaad ah oo yar yar oo ka samaysan birta aan lahayn

6) Feer irbad dahab ah

7) Saacado, sawir

8) Tuubbada anteenada baabuurka, anteenooyinka bar ee isticmaalaya tubooyinka, tuubada anteenada

9) Qalabka wax lagu xardho ee Laser-ka si loo isticmaalo tuubada birta ah

10) Qalabka kalluumeysiga, agabka, Yugan oo la baxay lahaanshaha

11) Cunto leh daboolka birta aan lahayn

12) dhamaan noocyada kala duwan ee talefanka gacanta ee stylus-ka kumbuyuutarka

13) Wershadaha kululaynta tuubooyinka, warshadaha shidaalka

14) Printers, irbad sanduuq aamusan

15) Soo jiid tuubo bir ah oo labajibbaaran oo dhalaalaysa oo lagu isticmaalo daaqadaha

16) Noocyada kala duwan ee dhexroorka yar yar ee warshadaha Saxnaanta tuubooyinka birta aan lahayn

17) Bixinta saxda ah ee cirbadaha birta ah

18) Makarafoon, sameecado iyo makarafoon si ay u isticmaalaan tuubada birta ah ee aan la taaban karin, iyo wixii la mid ah

Hore: Inconel 625 (UNS N06625) tuubooyinka kaabadaha ee birta ah

Xiga: Ncoloy 825 (UNS N08825) tuubooyinka xididka ee birta ah

Halkan ku qor fariintaada oo noo soo dir

Alaabooyinka la xidhiidha

Ncoloy 825 (UNS N08825) daboolka birta ah ee aan fiicnayn

Kala duwanaanta wax soo saarka: birta birta ah ee birta ah ee birta ah ee birta birta ah ee birta ah ee birta ah ee birta ah ee birta ah ee birta ah ee birta ah ee birta ah ee birta ah ee birta ah ee birta ah ee birta ah ee birta birta ah ee birta ah alaab-qeybiyeyaasha birta birta ah ee birta ah ee birta birta ah ee birta birta ah ee birta birta ah ee birta yar yar ayaa si weyn loogu isticmaalaa daaweynta caafimaadka, fiber-optic, qalin samaynta, alaabta alxanka elektiroonigga ah, cabitaanka fiilada iftiinka, kala duwanaanta biyaha, cunnada in dib loo...

Fiiri alaabooyin badan>

304 304L aan xuduud lahayn

904L birta aan la isku duubin

ASTM A249 904 Stein aan lahayn

A269 304 birta aan-qabow ca...

astm 316 birta birta ah ee co...