AISI 316 stainless steel capillary tube

Short Description:

1.Production standards: ASTM A269/A249

2.Stainless steel material :304 304L 316L(UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825)  Inconel 625 (UNS N06625)

3. Size range: diameter 3MM(0.118”-25.4(1.0”)MM

4. Wall thicknesses: 0.5mm (0.020’’) to 3mm (0.118’’)

5.General delivery pipe status: half hard / soft bright annealing

6.The tolerance range: diameter: + 0.1mm, wall thickness: + 10%, length: -0/+6mm

7.Coil lengthsup to: 500MM-13500MM (45000feet)(can be adjusted according to customer requirements)


Product Detail

Product Tags

Manufacturing range:

stainless steel coil tube
stainless steel tube coil
stainless steel coil tubing
stainless steel coil pipe
stainless steel coil tube suppliers
stainless steel coil tube manufacturers
stainless steel pipe coil

Stainless steel capillary, AISI 316  stainless steel capillary tube stainless steel small tube is widely used in medical treatment, fiber-optic, pen making, electronic welding products, light cable joint, food, vintage, dairy, drink, pharmacy and biochemistry, different length can be provided according to requests

Capillary tubes with a maximum bore of 0.0158 in., available in a wide range of stainless steels. Sandvik capillary tubes are characterized by tight tolerances, and the inside surface of the tubes is free from oil, grease and other particles. This ensures, for example, an optimized and even flow of liquids and gases from the sensor to the measuring instrument.

Stainless steel Coiled tubing is available in a range of different product forms depending on the customer requirements. Licancheng sihe stainless steel material manufactures welded and seamless  tube products. The standard grades are 304 304L 316L(UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825)  Inconel 625 (UNS N06625) Other grades of stainless steel in duplex and superduplex and nickel alloy are available on request.

Diameter from 3mm (0.118’’) to 25.4mm (1.00’’) OD. Wall thickness from 0.5mm (0.020’’) to 3mm (0.118’’).Tubing can be supplied in the annealed or cold worked stainless steel control line pipe condition.

316 Stainless Steel Chemical Composition

Grade C Mn Si P S Cr Mo Ni N

316

min.

 16.0

2.0-3.0

 10.0

max.

 0.035

2.0

0.75

0.045

0.030

 18.0

 14.0

Stainless Steel 316 Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max

316

515

205

40

95

217

Stainless Steel 316 Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C

316

7750

200

15.9

16.2

17.0

14.2

18.7

500

720

Stainless Steel 316 Equivalent

Equivalent Grades for 316 Stainless Steel

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN

SS 316

1.4401 / 1.4436

S31600

SUS 316

316S31 / 316S33

Z7CND17‐11‐02

X5CrNiMo17-12-2 / X3CrNiMo17-13-3

Specification

Brand Liaocheng Sihe Stainless STEEL
Thickness 0.1-2.0mm
Diameter 0.3-20mm (tolerance: ±0.01mm)
Stainless  Grade 201,202,304,304L,316L,317L,321,310s,254mso,904L,2205,625 etc.
Surface Finish inside and outside are both bright annealing, cleaning, and seamless, no leaks.
Standard ASTM A269-2002.JIS G4305/ GB/T 12770-2002GB/T12771-2002
Length 200-1500m per coil, or As customer required
Stock size 6*1mm ,8*0.5mm ,8*0.6mm,8*0.8mm, 8*0.9mm,8*1mm, 9.5*1mm,10*1mm,ect..
Certificate ISO&BV
Packing way Woven bags,plastic bags etc.
Application range widely used in food industry, beverage equipment, beer machine, heat exchanger, milk/ water supply system, medical equipmentsolarenergy, medical equipment, aviation, aerospace, communications, oil and other industries
Note OEM / ODM / Buyer Label accepted.

Size of Stainless steel Coil Tube

ITEM

Grade

Size
(MM)

Pressure
(Mpa)

Length
(M)

1

316L、304L、304 alloy  625 825 2205 2507

1/8″×0.025″

3200

500-35000

2

316L、304L、304 alloy  625 825 2205 2507

1/8″×0.035″

3200

500-35000

3

316L、304L、304 alloy  625 825 2205 2507

1/4″×0.035″

2000

500-35000

4

316L、304L、304 alloy  625 825 2205 2507

1/4″×0.049″

2000

500-35000

5

316L、304L、304 alloy  625 825 2205 2507

3/8″×0.035″

1500

500-35000

6

316L、304L、304 alloy  625 825 2205 2507

3/8″×0.049″

1500

500-35000

7

316L、304L、304 alloy  625 825 2205 2507

1/2″×0.049″

1000

500-35000

8

316L、304L、304 alloy  625 825 2205 2507

1/2″×0.065″

1000

500-35000

9

316L、304L、304 alloy  625 825 2205 2507

φ3mm×0.7mm

3200

500-35000

10

316L、304L、304 alloy  625 825 2205 2507

φ3mm×0.9mm

3200

500-35000

11

316L、304L、304 alloy  625 825 2205 2507

φ4mm×0.9mm

3000

500-35000

12

316L、304L、304 alloy  625 825 2205 2507

φ4mm×1.1mm

3000

500-35000

13

316L、304L、304 alloy  625 825 2205 2507

φ6mm×0.9mm

2000

500-35000

14

316L、304L、304 alloy  625 825 2205 2507

φ6mm×1.1mm

2000

500-35000

15

316L、304L、304 alloy  625 825 2205 2507

φ8mm×1mm

1800

500-35000

16

316L、304L、304 alloy  625 825 2205 2507

φ8mm×1.2mm

1800

500-35000

17

316L、304L、304 alloy  625 825 2205 2507

φ10mm×1mm

1500

500-35000

18

316L、304L、304 alloy  625 825 2205 2507

φ10mm×1.2mm

1500

500-35000

19

316L、304L、304 alloy  625 825 2205 2507

φ10mm×2mm

500

500-35000

20

316L、304L、304 alloy  625 825 2205 2507

φ12mm×1.5mm

500

500-35000

Pressure tables
Selection of the appropriate material for any given control or chemical injection line AISI 316  stainless steel capillary tube is subject to the prevailing operational and site conditions. In order to assist in the selection, the following tables provide internal pressure ratings and the adjustments factors for a range of common grades and sizes of seamless and laser welded stainless tubing.
Maximum pressure (P) for TP 316L at 100°F (38°C)1)
Please refer to grade and product form adjustment factors below.
Outside diameter,   in. Wall thickness, in. Working pressure2) Burst pressure2) Collapse pressure4)
psi (MPa) psi (MPa) psi (MPa)
1/4 0.035 6,600 (46) 22,470 (155) 6,600 (46)
1/4 0.049 9,260 (64) 27,400 (189) 8,710 (60)
1/4 0.065 12,280 (85) 34,640 (239) 10,750 (74)
3/8 0.035 4,410 (30) 19,160 (132) 4,610 (32)
3/8 0.049 6,170 (43) 21,750 (150) 6,220 (43)
3/8 0.065 8,190 (56) 25,260 (174) 7,900 (54)
3/8 0.083 10,450 (72) 30,050 (207) 9,570 (66)
1/2 0.049 4,630 (32) 19,460 (134) 4,820 (33)
1/2 0.065 6,140 (42) 21,700 (150) 6,200 (43)
1/2 0.083 7,840 (54) 24,600 (170) 7,620 (53)
5/8 0.049 3,700 (26) 18,230 (126) 3,930 (27)
5/8 0.065 4,900 (34) 19,860 (137) 5,090 (35)
5/8 0.083 6,270 (43) 26,910 (151) 6,310 (44)
3/4 0.049 3,080 (21) 17,470 (120) 3,320 (23)
3/4 0.065 4,090 (28) 18,740 (129) 4,310 (30)
3/4 0.083 5,220 (36) 20,310 (140) 5,380 (37)
1) Estimates only. Actual pressures should be calculated considering all stress factors in the system.
2) Based on calculations from API 5C3, using a wall tolerance of +/-10%
3) Based on ultimate strength burst calculations from API 5C3
4) Based on yield strength collapse calculations from API 5C3
Adjustment factors for working pressure limits1)
Pw = reference working pressure rating for TP 316L at 100°F (38°C). To determine working pressure for grade/temperature combination, multiply Pw by adjustment factor.
Grade 100°F 200°F 300°F 400°F
(38°C) (93°C) (149°C) (204°C)
TP 316L, seamless 1 0.87 0.7 0.63
TP 316L, welded 0.85 0.74 0.6 0.54
Alloy 825, seamless 1.33 1.17 1.1 1.03
Alloy 825, welded 1.13 1.99 1.94 0.88
1) Adjustment factors based on allowable stress in ASME.
Adjustment factors for burst pressure limits1)
Pb = reference burst pressure for TP 316L at 100°F. To determine burst pressure for grade/temperature combination, multiply Pb by adjustment factor.
Grade 100°F 200°F 300°F 400°F
(38°C) (93°C) (149°C) (204°C)
TP 316L, seamless 1 0.93 0.87 0.8
TP 316L, welded 0.85 0.79 0.74 0.68
Alloy 825, seamless 1.13 1.07 1 0.87
Alloy 825, welded 0.96 0.91 0.85 0.74

1) Adjustment factors based on ultimate strength in ASME.

Stainless steel coiled tubing /coiled tubes  size:

2c4e0a82fa4356d47c0468206007e49

568c28fcf08758a1a41c474d1212672

Our Production line

未命名

Stainless steel coiled tubing

 

pipe factory_副本

Quality advantage:

The quality of our products for the control line in oil and gas sector is assured not just during the controlled manufacturing process but also by way of finished product testing. Typical tests include:

1.Non-destructive tests

2. Hydrostatic tests

3.Surface finish controls

4. Dimensional accuracy measurements

5.Flare and coning tests

6. Mechanical and chemical property testing

Application caillary tube

1) Medical device industry

2) temperature-guided industrial temperature control, sensors used pipe, tube thermometer

3) Pens care industry core tube

4) micro-tube antenna, various types of small precision stainless steel antenna

5) With a variety of electronic small-diameter Stainless steel capillary

6) Jewelry needle punch

7) Watches, picture

8) Car antenna tube, bar antennas using tubes, antenna tube

9) Laser engraving equipment to use stainless steel tube

10) Fishing gear, accessories, Yugan out with possession of

11) Diet with stainless steel capillary

12) all types of mobile phone stylus  a computer stylus

13) Heating pipe industry, oil industry

14) Printers, silent box needle

15) Pull a double-melt stainless steel tube used in window-coupled

16) A variety of industrial small diameter Precision stainless steel tubes

17) Precision dispensing with stainless steel needles

18) Microphone, headphones and microphone to use stainless steel tube, and so on

pipe packging

222

 


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • 316L stainless steel capillary tubing

      316L stainless steel capillary tubing

      Manufacturing range: stainless steel coil tube stainless steel tube coil stainless steel coil tubing stainless steel coil pipe stainless steel coil tube suppliers stainless steel coil tube manufacturers stainless steel pipe coil Stainless steel capillary, stainless steel small tube is widely used in medical treatment, fiber-optic, pen making, electronic welding products, light cable joint, food, vintage, dairy, drink, pharmacy and biochemistry, different length can be provided according to re...

    • 316l Capillary tube

      316l Capillary tube

      Products name :Stainless steel capillary tube Grade :201 304 304L  316  316L  904L  310s  2205  2507 625  825 Usage :Dynamic instrument signal tube, 304 Stainless steel capillary tube  can be used automatic instrument wire protection tube; Precision optical ruler line, industrial sensors, electronic equipment line protection tube; The safety protection of electrical circuit, the protection of thermal instrument capillaries and the inner support of hollow core high voltage cable Size :OD:0.25-...

    • ASTM 316 stainless steel capillary tubing

      ASTM 316 stainless steel capillary tubing

      Manufacturing range: stainless steel coil tube stainless steel tube coil stainless steel coil tubing stainless steel coil pipe stainless steel coil tube suppliers stainless steel coil tube manufacturers stainless steel pipe coil Stainless steel capillary, stainless steel small tube is widely used in medical treatment, fiber-optic, pen making, electronic welding products, light cable joint, food, vintage, dairy, drink, pharmacy and biochemistry, different length can be provided according to re...

    • astm  a269 316L stainless steel control line tube

      astm a269 316L stainless steel control line tube

      Related products: ASTM 269 304 stainless steel Coiled Tubing  trader,stainless steel Coiled Pipe astm,stainless steel coiled tubing cutter,hplc stainless steel capillary tubing,cutting stainless steel coiled tubing,stainless steel 1/16 in. capillary tubing, weight of stainless steel Capillary pipe per foot,weight of stainless steel Coiled pipe,stainless steel Coiled pipe for sale,stainless steel Coiled Pipe weight per foot,Stainless Steel Coiled tube3/8”*0.049Inch Suppliers,stainless steel Co...

    • 304 Capillary Tubing 1.6*0.4mm in Coiled for medical

      304 Capillary Tubing 1.6*0.4mm in Coiled for me...

      304 Capillary Tubing 1.6*0.4mm in Coiled for medical Products name: 304 Capillary Tubing 1.6*0.4mm in Coiled for medical Size :3.2*0.5mm Length :100-3000m/coil Surface:bright and  soft and annealed Type: seamless or welded Descreption: stainless steel coil  tube Grade:    201 304 304L  316  316L  2205  2507 625  825  ect Size:       6-25.4mm Thickness:0.2-2mm Length:    600-3500M/coil Standard:   ASTM A269  A249   A789  A312 SUS  DIN JIS  GB Surface :   Bright  anneald Test :    Yield strengt...

    • 316 stainless steel 3.175*0.5mm  capillary tubing

      316 stainless steel 3.175*0.5mm capillary tubing

      316 stainless steel 3.175*0.5mm capillary tubing 316 STAINLESS STEEL COIL TUBING, STAINLESS STEEL 316L COIL TUBE DEALER, STAINLESS STEEL 201 COIL TUBES SUPPLIER, SS COIL TUBE EXPORTER, STAINLESS STEEL WELDED COIL TUBE, STEEL COIL TUBING LIAOCHENG SIHE STAINLESS STEEL  is privately owned  Supplier of Stainless Steel Coil Tube 316 stainless steel 3.175*0.5mm capillary tubing  , stainless steel welded pipe manufactured as per with national and international standards.We are also stockist and dis...