AISI 2205(UNS S31803) peipi ea phapanyetsano ea tšepe e sa hloekang
AISI 2205(UNS S31803) peipi ea phapanyetsano ea tšepe e sa hloekang
Mocheso o futhumatsang ka har'a mefuta e mengata ea litšepe tse sa hloekang tsa austenitic, litšepe tse sa hloekang tse duplex, li-alloys tsa nickel, titanium le zirconium, tse loketseng mefuta eohle ea li-heaters tsa mocheso, joalo ka li-coolers tsa metsi a leoatle, li-condensers, li-evaporator, li-heaters le li-reheaters.
Li-tubes tsa mocheso oa mocheso li sebelisoa mefuteng eohle ea liindasteri tsa ts'ebetso.Litlhoko tsa litšobotsi ke: bead e sebelitseng weld, bolelele bo tsitsitseng le tlhahlobo e pharaletseng.
Boitlamo ba rona ba ho fana ka thepa ka nako le ho fana ka thepa ea boleng bo holimo bo re thusitse ho aha likamano tse tšoarellang le lik'hamphani tsa boenjiniere le basebelisi ba ho qetela lefatšeng ka bophara.
E 'ngoe le e' ngoe ea U bend tube ea mofuta oa rona e hlahlojoa ka thata ke sehlopha sa rona sa litsebi tse nang le talenta mothating o mong le o mong oa tlhahiso ho fana ka lihlahisoa tsa boleng bo holimo tse sa lefelloeng tsa bareki.
Boemo ba Mosebetsi:
- Lehlakore la sehatsetsing(Ka har'a tube): R22,R134a,R407c,R410a joalo-joalo.
- Lehlakore la metsi (ka tankeng ea hau): Metsi a tlhaho, metsi a nooang, metsi a leoatle jj
Likaroloana:
- Hangata e sebelisetsoa ho futhumatsa le ho pholisa.
- Tube ea titanium e hloekileng e na le matla a matla a ho paka ho bola le matla a holimo.
- Thepa ea titanium e se nang moeli e ile ea lekoa ke khatello ea 2.0MPa ho etsa bonnete ba hore tube e matla 'me ha e lutle.
- E na le sebopeho sa khanyetso e matla ea kutu, e hanyetsa mocheso o motle, conductivity e phahameng, e se nang chefo, ha e na tekanyo, ha e thibele, ha e na tšilafalo ea mahareng, 'me ha ho bonolo ho theha li-oxide holim'a metsi.
- tšepe coil tube
tšepe e se nang tšepe tube coil
li-tubing tsa tšepe tse se nang tšepe
phala ea tšepe e se nang tšepe
bafani ba li-tube tsa tšepe tse se nang tšepe
baetsi ba li-tube tsa tšepe tse se nang tšepe
tšepe ea tšepe e sa hloekang ea phala
Tlhaloso
Kereiti:hangata ASTM A213 S304/304L,316/316L ,317L ,321/321H , 410,Duplex 2205 (UNS S31803)
Tloaelo:ASTM A312 ASTM A269 213
Tshebetso: Mokgoa Mohatsela/ Mohatsela
Surface Finish:Annealed/ Boetsuwa ba ho penta
Sephutheloana: Mokotla o lohiloeng bakeng sa sengoathoana se seng le se seng, ebe o kenngoa ka har'a mekotla ea lehong e khonang ho kena leoatleng
Nako ea thomello: Matsatsi a 20-60 ka mor'a ho amohela depositi (Ka tloaelo ho ea ka palo ea taelo)
Theko Ntho:FOB, CIF kapa joalo ka lipuisano
Tefo:T/T(30% esale pele, 70% khahlano le BL Copy) kapa joalo ka lipuisano
Tlhokahalo ea Boleng:Setifikeiti sa Tlhahlobo ea Mill se tla fanoa ka thepa, Tlhahlobo ea Karolo ea Boraro ea amoheleha
Tšireletso ea bokaholimo:Ntle le haeba ho boletsoe ka tsela e 'ngoe e le hore li-tubes li fanoe ka libaka tse ka hare le tse ka ntle tse sirelelitsoeng ka nakoana ka filimi ea oli e khanyang ea liminerale.
Li-tubes lia fela:Li-tubes li fanoa ka mokhoa o hlakileng, li-square cut, 'me ka kopo li-tubes li ka ntšoa.
1 .Re sebelisa theknoloji ea Cold Drawn ho hlahisa U bend tube
2 .Lihlahisoa tsa U bend li tla latela litšoantšo tsa bareki
3 .Ho qoba oxidation, khase ea inert (Argon) e fetisoa ka li-tubes ID ka tekanyo e hlokahalang ea phallo
4 .Radius e hlahlojoa bakeng sa OD ea eona le lerako le tšesaane ka litlhaloso tse khothaletsoang
5 .Re tla khetha maemo a mararo a fapaneng kapa joalo ka ha moreki a hloka ho etsa bonnete ba hore li-tubes li na le boleng.Re tla etsa liteko tsa 'mele le tlhahlobo ea sebopeho sa micro-structure
6 .Tlhahlobo ea pono bakeng sa ho thothomela le mapetsong ho etsoa ka Dye Penetrant Test
7 .Ka mor'a moo, tube e 'ngoe le e' ngoe e hlahlojoa ke hydro ka khatello e khothalletsoang ho hlahloba hore na ha e lutle
Sebopeho sa Lik'hemik'halebakeng sa pipie ea tšepe e sa hloekang bakeng sa thepa e tala
| ASTM/UNS | C (boholo) | Si (max) | Mn (max) | P (boholo) | S (boholo) | Cr | Ni | Mo | Ti |
| TP304/S30400 | 0.080 | 1.00 | 2.00 | 0.045 | 0.03 | 18.0-20.0 | 8.0-10.5 | ||
| TP304L/S30403 | 0.035 | 1.00 | 2.00 | 0.045 | 0.03 | 18.0-20.0 | 8.0-13.0 | ||
| TP304H/S30409 | 0.04-0.10 | 1.00 | 2.00 | 0.045 | 0.03 | 18.0-20.0 | 8.0-11.0 | ||
| TP316/S31600 | 0.080 | 1.00 | 2.00 | 0.045 | 0.03 | 16.0-18.0 | 11.0-14.0 | 2.0-3.0 | |
| TP316L/S31603 | 0.035 | 1.00 | 2.00 | 0.045 | 0.03 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | |
| TP316Ti/S31635 | 0.080 | 1.00 | 2.00 | 0.045 | 0.03 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 0.7>5x(C+N) |
| TP321/S32100 | 0.080 | 1.00 | 2.00 | 0.045 | 0.03 | 17.0-19.0 | 9.0-12.0 | 0.7>5x(C+N) | |
| TP317L/S31703 | 0.035 | 1.00 | 2.00 | 0.045 | 0.03 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 | |
| TP347H/S34709 | 0.04-0.10 | 1.00 | 2.00 | 0.045 | 0.03 | 17.0-19.0 | 9.0-13.0 | ||
| TP309S/S30908 | 0.080 | 1.00 | 2.00 | 0.045 | 0.03 | 22.0-24.0 | 12.0-15.0 | 0.75 | |
| TP310S/S31008 | 0.080 | 1.00 | 2.00 | 0.045 | 0.03 | 24.0-26.0 | 19.0-22.0 | 0.75 |
Kopo:
a) Petroleum, khoebo ea lik'hemik'hale, heater e kholo ea boiler le mochini o futhumatsang mocheso
b) Phaephe ea mokelikeli o phahameng o hanyetsanang le mocheso seteisheneng sa motlakase
c) Sekepe se nang le phala ea khatello
d) Sesebelisoa sa tlhoekiso ea mokhathala
e) Kaho le mokhabiso
f) indasteri ea letsatsi, sesole, semiconductor joalo-joalo.
▼Sekhahla sa lisebelisoa tsa tšepe e sa hloekang / coiled tubes material:
| usa | JEREMANE | JEREMANE | FRANSE | JAPANE | ITALIA | SWEDEN | UK | EU | SPAIN | RUSE |
| AISI | DIN 17006 | WN 17007 | HLOMPHO | JIS | UNI | SIS | BSI | EURONORM | ||
| 201 | SUS 201 | |||||||||
| 301 | X 12 CrNi 17 7 | 1.4310 | Z 12 CN 17-07 | SUS 301 | X 12 CrNi 1707 | 23 31 | 301S21 | X 12 CrNi 17 7 | X 12 CrNi 17-07 | |
| 302 | X 5 CrNi 18 7 | 1.4319 | Z 10 CN 18-09 | SUS 302 | X 10 CrNi 1809 | 23 31 | 302S25 | X 10 CrNi 18 9 | X 10 CrNi 18-09 | 12KH18N9 |
| 303 | X 10 CrNiS 18 9 | 1.4305 | Z 10 CNF 18-09 | SUS 303 | X 10 CrNiS 1809 | 23 46 | 303S21 | X 10 CrNiS 18 9 | X 10 CrNiS 18-09 | |
| 303 Se | Z 10 CNF 18-09 | SUS 303 Se | X 10 CrNiS 1809 | 303S41 | X 10 CrNiS 18-09 | 12KH18N10E | ||||
| 304 | X 5 CrNi 18 10 X 5 CrNi 18 12 | 1.4301 1.4303 | Z 6 CN 18-09 | SUS 304 | X 5 CrNi 1810 | 23 32 | 304S15 304S16 | X 6 CrNi 18 10 | X 6 CrNi 19-10 | 08KH18N10 06KH18N11 |
| 304 N | Tlhaloso: SUS 304N1 | X 5 CrNiN 1810 | ||||||||
| 304 H | SUS F 304H | X 8 CrNi 1910 | X 6 CrNi 19-10 | |||||||
| 304 L | X 2 CrNi 18 11 | 1.4306 | Z 2 CN 18-10 | SUS 304L | X 2 CrNi 1911 | 23 52 | 304S11 | X 3 CrNi 18 10 | X 2 CrNi 19-10 | 03KH18N11 |
| X 2 CrNiN 18 10 | 1.4311 | Z 2 CN 18-10-Az | Tlhaloso: SUS304LN | X 2 CrNiN 1811 | 23 71 | |||||
| 305 | Z 8 CN 18-12 | SUS 305 | X 8 CrNi 1812 | 23 33 | 305S19 | X 8 CrNi 18 12 | X 8 CrNi 18-12 | |||
| Z 6 CNU 18-10 | SUS XM7 | X 6 CrNiCu 18 10 4 Kd | ||||||||
| 309 | X 15 CrNiS 20 12 | 1.4828 | Z 15 CN 24-13 | SUH 309 | X 16 CrNi 2314 | 309S24 | X 15 CrNi 23 13 | |||
| 309 S | SUS 309S | X 6 CrNi 2314 | X 6 CrNi 22 13 | |||||||
| 310 | X 12 CrNi 25 21 | 1.4845 | SUH 310 | X 22 CrNi 2520 | 310S24 | 20KH23N18 | ||||
| 310 S | X 12 CrNi 25 20 | 1.4842 | Z 12 CN 25-20 | SUS 310S | X 5 CrNi 2520 | 23 61 | X 6 CrNi 25 20 | 10KH23N18 | ||
| 314 | X 15 CrNiSi 25 20 | 1.4841 | Z 12 CNS 25-20 | X 16 CrNiSi 2520 | X 15 CrNiSi 25 20 | 20KH25N20S2 | ||||
| 316 | X 5 CrNiMo 17 12 2 | 1.4401 | Z 6 CND 17-11 | SUS 316 | X 5 CrNiMo 1712 | 23 47 | 316S31 | X 6 CrNiMo 17 12 2 | X 6 CrNiMo 17-12-03 | |
| 316 | X 5 CrNiMo 17 13 3 | 1.4436 | Z 6 CND 17-12 | SUS 316 | X 5 CrNiMo 1713 | 23 43 | 316S33 | X 6 CrNiMo 17 13 3 | X 6 CrNiMo 17-12-03 | |
| 316 F | X 12 CrNiMoS 18 11 | 1.4427 | ||||||||
| 316 N | SUS 316N | |||||||||
| 316 H | SUS F 316H | X 8 CrNiMo 1712 | X 5 CrNiMo 17-12 | |||||||
| 316 H | X 8 CrNiMo 1713 | X 6 CrNiMo 17-12-03 | ||||||||
| 316 L | X 2 CrNiMo 17 13 2 | 1.4404 | Z 2 CND 17-12 | SUS 316L | X 2 CrNiMo 1712 | 23 48 | 316S11 | X 3 CrNiMo 17 12 2 | X 2 CrNiMo 17-12-03 | 03KH17N14M2 |
| X 2 CrNiMoN 17 12 2 | 1.4406 | Z 2 CND 17-12-Az | Tlhaloso: SUS 316LN | X 2 CrNiMoN 1712 | ||||||
| 316 L | X 2 CrNiMo 18 14 3 | 1.4435 | Z 2 CND 17-13 | X 2 CrNiMo 1713 | 23 53 | 316S13 | X 3 CrNiMo 17 13 3 | X 2 CrNiMo 17-12-03 | 03KH16N15M3 | |
| X 2 CrNiMoN 17 13 3 | 1.4429 | Z 2 CND 17-13-Az | X 2 CrNiMoN 1713 | 23 75 | ||||||
| X 6 CrNiMoTi 17 12 2 | 1.4571 | Z6 CNDT 17-12 | X 6 CrNiMoTi 1712 | 23 50 | 320S31 | X 6 CrNiMoTi 17 12 2 | X 6 CrNiMoTi 17-12-03 | 08KH17N13M2T 10KH17N13M2T | ||
| X 10 CrNiMoTi 18 12 | 1.4573 | X 6 CrNiMoTi 1713 | 320S33 | X 6 CrNiMoTI 17 13 3 | X 6 CrNiMoTi 17-12-03 | 08KH17N13M2T 10KH17N13M2T | ||||
| X 6 CrNiMoNb 17 12 2 | 1.4580 | Z 6 CNDNb 17-12 | X 6 CrNiMoNb 1712 | X 6 CrNiMoNb 17 12 2 | 08KH16N13M2B | |||||
| X 10 CrNiMoNb 18 12 | 1.4583 | X 6 CrNiMoNb 1713 | X 6 CrNiMoNb 17 13 3 | 09KH16N15M3B | ||||||
| 317 | SUS 317 | X 5 CrNiMo 1815 | 23 66 | 317S16 | ||||||
| 317 L | X 2 CrNiMo 18 16 4 | 1.4438 | Z 2 CND 19-15 | SUS 317L | X 2 CrNiMo 1815 | 23 67 | 317S12 | X 3 CrNiMo 18 16 4 | ||
| 317 L | X 2 CrNiMo 18 16 4 | 1.4438 | Z 2 CND 19-15 | SUS 317L | X 2 CrNiMo 1816 | 23 67 | 317S12 | X 3 CrNiMo 18 16 4 | ||
| 330 | X 12 NiCrSi 36 16 | 1.4864 | Z 12NCS 35-16 | SUH 330 | ||||||
| 321 | X 6 CrNiTi 18 10 X 12 CrNiTi 18 9 | 1.4541 1.4878 | Z 6 CNT 18-10 | SUS 321 | X 6 CrNiTi 1811 | 23 37 | 321S31 | X 6 CrNiTi 18 10 | X 6 CrNiTi 18-11 | 08KH18N10T |
| 321 H | SUS 321H | X 8 CrNiTi 1811 | 321S20 | X 7 CrNiTi 18-11 | 12KH18N10T | |||||
| 329 | X 8 CrNiMo 27 5 | 1.4460 | SUS 329J1 | 23 24 | ||||||
| 347 | X 6 CrNiNb 18 10 | 1.4550 | Z 6 CNNb 18-10 | SUS 347 | X 6 CrNiNb 1811 | 23 38 | 347S31 | X 6 CrNiNb 18 10 | X 6 CrNiNb 18-11 | 08KH18N12B |
| 347 H | SUS F 347H | X 8 CrNiNb 1811 | X 7 CrNiNb 18-11 | |||||||
| 904L | 1.4939 | Z 12 CNDV 12-02 | ||||||||
| X 20 CrNiSi 25 4 | 1.4821 | |||||||||
| UNS31803 | X 2 CrNiMoN 22 5 | 1.4462 | ||||||||
| UNS32760 | X 3 CrNiMoN 25 7 | 1.4501 | Z 3 CND 25-06Az | |||||||
| 403 | X 6Kr 13 X 10 Kr 13 X 15 Kr 13 | 1.4000 1.4006 1.4024 | Z 12 C 13 | SUS 403 | X 12 Kr 13 | 23 02 | 403S17 | X 10 Kr 13 X 12 Kr 13 | X 6Kr 13 | 12Kh13 |
| 405 | X 6 Likoloi 13 | 1.4002 | Z 6 CA 13 | SUS 405 | X 6 Likoloi 13 | 405S17 | X 6 Likoloi 13 | X 6 Likoloi 13 | ||
| X 10 CrAl 7 | 1.4713 | Z8 CA 7 | X 10 CrAl 7 | |||||||
| X 10 CrAl 13 | 1.4724 | X 10 CrAl 12 | 10Kh13SYu | |||||||
| X 10 CrAl 18 | 1.4742 | X 10 CrSiAl 18 | 15Kh18Syu | |||||||
| 409 | X 6 CrTi 12 | 1.4512 | Z 6 CT 12 | SUH 409 | X 6 CrTi 12 | 409S19 | X 5 CrTi 12 | |||
| X 2 CrTi 12 | ||||||||||
| 410 | X 6Kr 13 X 10 Kr 13 X 15 Kr 13 | 1.4000 1.4006 1.4024 | Z 10 C 13 Z 12 C 13 | SUS 410 | X 12 Kr 13 | 23 02 | 410S21 | X 12 Kr 13 | X 12 Kr 13 | 12Kh13 |
| 410 S | X 6Kr 13 | 1.4000 | Z 6 C 13 | SUS 410S | X 6Kr 13 | 23 01 | 403S17 | X 6Kr 13 | 08Kh13 |
Feme
Molemo oa boleng:
Boleng ba lihlahisoa tsa rona bakeng sa mohala oa taolo lefapheng la oli le khase ha bo tiisetsoe feela nakong ea ts'ebetso e laoloang ea tlhahiso empa hape le ka mokhoa oa tlhahlobo ea sehlahisoa se felileng.Liteko tse tloaelehileng li kenyelletsa:
1.Liteko tse sa senyeheng
2. Litlhahlobo tsa Hydrostatic
3.Surface finish controls
4. Litekanyo tsa ho nepahala ha litekanyo
5.Flare le liteko tsa coning
6. Teko ea thepa ea mechine le ea lik'hemik'hale
Sesebelisoa sa caillary tube
1) Indasteri ea lisebelisoa tsa bongaka
2) taolo ea mocheso oa indasteri e tataisoang ke mocheso, li-sensor tse sebelisitsoeng phala, thermometer ea tube
3) Tube ea mantlha ea indasteri ea tlhokomelo ea lipene
4) micro-tube antenna, mefuta e fapaneng ea antenna e nyane e nepahetseng ea tšepe e sa hloekang
5) Ka mefuta e fapaneng ea elektronike nyenyane-diameter Stainless tšepe capillary
6) Punch ea nale ea mabenyane
7) Litebelo, setšoantšo
8) Tube ea antenna ea koloi, li-antenna tsa bar tse sebelisang li-tubes, tube ea antenna
9) Laser fatiloeng thepa ho sebelisa stainless tšepe tube
10) Lisebelisoa tsa ho tšoasa litlhapi, lisebelisoa, Yugan ntle le thepa ea
11) Lijo tse nang le capillary ea tšepe e sa hloekang
12) mefuta eohle ea setaele sa mohala oa mohala ke setaele sa khomphutha
13) Indasteri ea lipeipi tse futhumatsang, indasteri ea oli
14) Lihatisi, nale ea lebokose le khutsitseng
15) Hula tube ea tšepe e sa hloekang e qhibilihisitsoeng habeli e sebelisoang ka fensetere e kopantsoeng
16) Mefuta e fapaneng ea liindasteri tse nyane bophara ba li-tubes tsa tšepe tse sa hloekang
17) Ho fana ka mokhoa o nepahetseng ka lisebelisoa tsa tšepe tse sa hloekang
18) Microphone, li-headphones le microphone ho sebelisa tube ea tšepe e sa hloekang, joalo-joalo
Lihlahisoa tse amanang
-
2205(UNS S31803) peipi ea phapanyetsano ea tšepe e sa hloekang
2205(UNS S31803) peipi ea tšepe e sa hloekang ea mochini o futhumatsang mocheso ka har'a mefuta e mengata e mengata ea litšepe tse sa jeleng paate tse duplex, li-alloys tsa nickel, titanium le zirconium, tse loketseng mefuta eohle ea licheso tse futhumatsang, joalo ka li-coolers tsa metsi a leoatle, li-condensers, li-evaporator le li-heaters.Li-tubes tsa mocheso oa mocheso li sebelisoa mefuteng eohle ea liindasteri tsa ts'ebetso.Litlhoko tsa litšobotsi ke: bead e sebelitseng weld, bolelele bo tsitsitseng le tlhahlobo e pharaletseng.Boitlamo ba rona ba ho fana ka thepa ka nako le ...
