Renewable Design for Stainless Steel Capillary Tubes - Super Duplex 2507 (UNS S32750)stainless steel capillary tubing – Sihe
Renewable Design for Stainless Steel Capillary Tubes - Super Duplex 2507 (UNS S32750)stainless steel capillary tubing – Sihe Detail:
Manufacturing range:
Stainless steel capillary, stainless steel small tube is widely used in medical treatment, fiber-optic, pen making, electronic welding products, light cable joint, food, vintage, dairy, drink, pharmacy and biochemistry, different length can be provided according to requests
Capillary tubes with a maximum bore of 0.0158 in., available in a wide range of stainless steels. Sandvik capillary tubes are characterized by tight tolerances, and the inside surface of the tubes is free from oil, grease and other particles. This ensures, for example, an optimized and even flow of liquids and gases from the sensor to the measuring instrument.
Stainless steel Coiled tubing is available in a range of different product forms depending on the customer requirements. Licancheng sihe stainless steel material manufactures welded and seamless tube products. The standard grades are 304 304L 316L(UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625) Other grades of stainless steel in duplex and superduplex and nickel alloy are available on request.
Diameter from 3mm (0.118’’) to 25.4mm (1.00’’) OD. Wall thickness from 0.5mm (0.020’’) to 3mm (0.118’’).Tubing can be supplied in the annealed or cold worked stainless steel control line pipe condition.
Specification
- Production standards: ASTM A269/A249, standard
- stainless steel material :304 304L 316L(UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625)
3. Size range: diameter 3MM(0.118”-25.4(1.0”)MM
4. Wall thicknesses: 0.5mm (0.020’’) to 3mm (0.118’’)
5.General delivery pipe status: half hard / soft bright annealing
6.The tolerance range: diameter: + 0.1mm, wall thickness: + 10%, length: -0/+6mm
7.Annual output: 600 tons
8.Coil lengthsup to: 500MM-13500MM (45000feet)(can be adjusted according to customer requirements)
Commonly Size of stainless steel coiled tube: we can product them as your request.
|
Size of Stainless steel Coil Tube |
||||||||||||||||
|
ITEM |
Grade |
Size |
Pressure |
Length |
||||||||||||
|
1 |
316L、304L、304 alloy 625 825 2205 2507 |
1/8″×0.025″ |
3200 |
500-35000 |
||||||||||||
|
2 |
316L、304L、304 alloy 625 825 2205 2507 |
1/8″×0.035″ |
3200 |
500-35000 |
||||||||||||
|
3 |
316L、304L、304 alloy 625 825 2205 2507 |
1/4″×0.035″ |
2000 |
500-35000 |
||||||||||||
|
4 |
316L、304L、304 alloy 625 825 2205 2507 |
1/4″×0.049″ |
2000 |
500-35000 |
||||||||||||
|
5 |
316L、304L、304 alloy 625 825 2205 2507 |
3/8″×0.035″ |
1500 |
500-35000 |
||||||||||||
|
6 |
316L、304L、304 alloy 625 825 2205 2507 |
3/8″×0.049″ |
1500 |
500-35000 |
||||||||||||
|
7 |
316L、304L、304 alloy 625 825 2205 2507 |
1/2″×0.049″ |
1000 |
500-35000 |
||||||||||||
|
8 |
316L、304L、304 alloy 625 825 2205 2507 |
1/2″×0.065″ |
1000 |
500-35000 |
||||||||||||
|
9 |
316L、304L、304 alloy 625 825 2205 2507 |
φ3mm×0.7mm |
3200 |
500-35000 |
||||||||||||
|
10 |
316L、304L、304 alloy 625 825 2205 2507 |
φ3mm×0.9mm |
3200 |
500-35000 |
||||||||||||
|
11 |
316L、304L、304 alloy 625 825 2205 2507 |
φ4mm×0.9mm |
3000 |
500-35000 |
||||||||||||
|
12 |
316L、304L、304 alloy 625 825 2205 2507 |
φ4mm×1.1mm |
3000 |
500-35000 |
||||||||||||
|
13 |
316L、304L、304 alloy 625 825 2205 2507 |
φ6mm×0.9mm |
2000 |
500-35000 |
||||||||||||
|
14 |
316L、304L、304 alloy 625 825 2205 2507 |
φ6mm×1.1mm |
2000 |
500-35000 |
||||||||||||
|
15 |
316L、304L、304 alloy 625 825 2205 2507 |
φ8mm×1mm |
1800 |
500-35000 |
||||||||||||
|
16 |
316L、304L、304 alloy 625 825 2205 2507 |
φ8mm×1.2mm |
1800 |
500-35000 |
||||||||||||
|
17 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×1mm |
1500 |
500-35000 |
||||||||||||
|
18 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×1.2mm |
1500 |
500-35000 |
||||||||||||
|
19 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×2mm |
500 |
500-35000 |
||||||||||||
|
20 |
316L、304L、304 alloy 625 825 2205 2507 |
φ12mm×1.5mm |
500 |
500-35000 |
||||||||||||
| Pressure tables | ||||||||||||||||
| Selection of the appropriate material for any given control or chemical injection line is subject to the prevailing operational and site conditions. In order to assist in the selection, the following tables provide internal pressure ratings and the adjustments factors for a range of common grades and sizes of seamless and laser welded stainless tubing. | ||||||||||||||||
| Maximum pressure (P) for TP 316L at 100°F (38°C)1) | ||||||||||||||||
| Please refer to grade and product form adjustment factors below. | ||||||||||||||||
| Outside diameter, in. | Wall thickness, in. | Working pressure2) | Burst pressure2) | Collapse pressure4) | ||||||||||||
| psi (MPa) | psi (MPa) | psi (MPa) | ||||||||||||||
| 1/4 | 0.035 | 6,600 (46) | 22,470 (155) | 6,600 (46) | ||||||||||||
| 1/4 | 0.049 | 9,260 (64) | 27,400 (189) | 8,710 (60) | ||||||||||||
| 1/4 | 0.065 | 12,280 (85) | 34,640 (239) | 10,750 (74) | ||||||||||||
| 3/8 | 0.035 | 4,410 (30) | 19,160 (132) | 4,610 (32) | ||||||||||||
| 3/8 | 0.049 | 6,170 (43) | 21,750 (150) | 6,220 (43) | ||||||||||||
| 3/8 | 0.065 | 8,190 (56) | 25,260 (174) | 7,900 (54) | ||||||||||||
| 3/8 | 0.083 | 10,450 (72) | 30,050 (207) | 9,570 (66) | ||||||||||||
| 1/2 | 0.049 | 4,630 (32) | 19,460 (134) | 4,820 (33) | ||||||||||||
| 1/2 | 0.065 | 6,140 (42) | 21,700 (150) | 6,200 (43) | ||||||||||||
| 1/2 | 0.083 | 7,840 (54) | 24,600 (170) | 7,620 (53) | ||||||||||||
| 5/8 | 0.049 | 3,700 (26) | 18,230 (126) | 3,930 (27) | ||||||||||||
| 5/8 | 0.065 | 4,900 (34) | 19,860 (137) | 5,090 (35) | ||||||||||||
| 5/8 | 0.083 | 6,270 (43) | 26,910 (151) | 6,310 (44) | ||||||||||||
| 3/4 | 0.049 | 3,080 (21) | 17,470 (120) | 3,320 (23) | ||||||||||||
| 3/4 | 0.065 | 4,090 (28) | 18,740 (129) | 4,310 (30) | ||||||||||||
| 3/4 | 0.083 | 5,220 (36) | 20,310 (140) | 5,380 (37) | ||||||||||||
| 1) Estimates only. Actual pressures should be calculated considering all stress factors in the system. | ||||||||||||||||
| 2) Based on calculations from API 5C3, using a wall tolerance of +/-10% | ||||||||||||||||
| 3) Based on ultimate strength burst calculations from API 5C3 | ||||||||||||||||
| 4) Based on yield strength collapse calculations from API 5C3 | ||||||||||||||||
| Adjustment factors for working pressure limits1) | ||||||||||||||||
| Pw = reference working pressure rating for TP 316L at 100°F (38°C). To determine working pressure for grade/temperature combination, multiply Pw by adjustment factor. | ||||||||||||||||
| Grade | 100°F | 200°F | 300°F | 400°F | ||||||||||||
| (38°C) | (93°C) | (149°C) | (204°C) | |||||||||||||
| TP 316L, seamless | 1 | 0.87 | 0.7 | 0.63 | ||||||||||||
| TP 316L, welded | 0.85 | 0.74 | 0.6 | 0.54 | ||||||||||||
| Alloy 825, seamless | 1.33 | 1.17 | 1.1 | 1.03 | ||||||||||||
| Alloy 825, welded | 1.13 | 1.99 | 1.94 | 0.88 | ||||||||||||
| 1) Adjustment factors based on allowable stress in ASME. | ||||||||||||||||
| Adjustment factors for burst pressure limits1) | ||||||||||||||||
| Pb = reference burst pressure for TP 316L at 100°F. To determine burst pressure for grade/temperature combination, multiply Pb by adjustment factor. | ||||||||||||||||
| Grade | 100°F | 200°F | 300°F | 400°F | ||||||||||||
| (38°C) | (93°C) | (149°C) | (204°C) | |||||||||||||
| TP 316L, seamless | 1 | 0.93 | 0.87 | 0.8 | ||||||||||||
| TP 316L, welded | 0.85 | 0.79 | 0.74 | 0.68 | ||||||||||||
| Alloy 825, seamless | 1.13 | 1.07 | 1 | 0.87 | ||||||||||||
| Alloy 825, welded | 0.96 | 0.91 | 0.85 | 0.74 | ||||||||||||
|
1) Adjustment factors based on ultimate strength in ASME. |
||||||||||||||||
Chemical composition:
|
316 Stainless steel capillary tube |
|||||||||
| Grade | UNS | C | Cr | Ni | Mo | Others | |||
| max. | |||||||||
|
TP 316L |
S31600/ S31603 |
0.03 |
17.5 |
13 |
2.1 |
0.1 |
|||
| Mechanical properties | |||||||||
| Grade |
Yield strength, |
Tensile strength, |
Elongation |
||||||
|
psi (MPa) |
psi (MPa) |
% |
|||||||
| TP 316L |
32,000 (220) |
75,000 (515) |
35 |
||||||
| Corrosion properties | |||||||||
|
Grade |
UNS |
PRE1) |
CPT2) F (oC) |
Max H2S3) |
CO24) |
||||
|
TP 316L |
S31600/S31603 |
24 |
95 (35) |
No limit |
+ |
||||
Quality advantage:
The quality of our products for the control line in oil and gas sector is assured not just during the controlled manufacturing process but also by way of finished product testing. Typical tests include:
1.Non-destructive tests
2. Hydrostatic tests
3.Surface finish controls
4. Dimensional accuracy measurements
5.Flare and coning tests
6. Mechanical and chemical property testing
Stainless steel coil tube Application:
- refrigeration equipment
- evaporator,
- gas liquid delivery
- Condenser
- beverage machine.
Product detail pictures:
Related Product Guide:
2018 Kawasaki Z900RS | Back To The Future | Astm A312 Stainless Steel Pipe
Sea Otter Classic: Carbon goodness from Santa Cruz and Trigon | Astm A312 Stainless Steel Pipe
To regularly increase the management program by virtue from the rule of "sincerely, good religion and high quality are the base of enterprise development", we greatly absorb the essence of linked products internationally, and constantly produce new goods to satisfy the calls for of shoppers for Renewable Design for Stainless Steel Capillary Tubes - Super Duplex 2507 (UNS S32750)stainless steel capillary tubing – Sihe , The product will supply to all over the world, such as: Bandung, Jamaica, Tunisia, Now, with the development of internet, and the trend of internationalization, we've got decided to extend business to overseas market. With the propose of bringing more profits to oversea customers by providing directly abroad. So we have changed our mind, from home to abroad, hope to give our customers more profit, and looking forward to more chance to make business.
By Abigail from Zurich - 2016.06.29 18:55
It is a very good, very rare business partners, looking forward to the next more perfect cooperation!
By Bella from Turkmenistan - 2016.07.07 13:00
Related products
-
Manufactur standard Ss304/ss316/sus304/316/316l...
Our products are broadly regarded and reliable by end users and can meet up with constantly transforming financial and social requires of Best Price for China Uns S31635 Alloy 316ti Stainless Seamless Steel Pipe, We’ll offer most effective top quality, quite possibly the most sector aggressive value, for each new and old customers with all the most excellent green services. Our products are broadly regarded and reliable by end users and can meet up with constantly transforming financial...
-
China Supplier Stainless Capillary Steel Tube -...
Attaining consumer satisfaction is our company’s purpose without end. We will make wonderful endeavours to produce new and top-quality merchandise, satisfy your exclusive requirements and supply you with pre-sale, on-sale and after-sale services for Best Price on China Cold Rolled 316 316L Stainless Steel Sheet 304 2b Price, We sincerely welcome all guests to arrange company relationships with us about the basis of mutual positive aspects. You should contact us now. You can get our skil...
-
Free sample for 316l Stainless Steel Condenser ...
We generally stick to the theory “Quality Very first, Prestige Supreme”. We’ve been fully committed to furnishing our shoppers with competitively priced high quality solutions, prompt delivery and expert services for ODM Factory Solid Reputation Cold Rolled Stainless Steel Plate Coil Tubing, We will empower people by communicating and listening, Setting an example to others and learning from experience. We generally stick to the theory “Quality Very first, Prestige Sup...
-
Factory Price 310s Decorative Stainless Steel P...
★ASTM A269 alloy 825 stainless steel coil tubing pipe suppliers Super alloys have the ability to function at very high temperatures and mechanical stress, and also where high surface stability is required. They have good creep and oxidation resistance, and can be produced in a variety of shapes. They can be strengthened by solid-solution hardening, work hardening, and precipitation hardening. Super alloys consist of a number of elements in a variety of combinations to achieve the desired resu...
-
Fast delivery Stainless Steel Pipe Stock - Sta...
ASTM A-312 Stainless steel Precision pipe for 201 grade Stainless steel pipe is one of the more standardized materials in the building and engineering industries. Stainless Steel Seamless Pipes is a hollow steel bar, a large number of pipes used for conveying fluids, such as oil, gas, water, gas, steam,heat exchanger,mechanical machine. Specification Standard:ASTM A-312、ASTM A-269、ASTM A-632、ASTM A-213,DIN 17458、DIN17456 JIS G3463、JIS G3459、JIS G3448 Material Grade:201/202/304/316 Oute...
-
OEM/ODM China Stainless Steel Pipe s - Manufac...
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Manufacturing Companies for China High Quality AISI 201 304 309 316 Rectangular AISI Ss Hairline Hollow Stainless Steel Square Pipe/Tube, We welcome new and previous customers from all walks of lifestyle to call us for upcoming business enterprise interactions and reach mutual accomplishment! We depend on sturdy technical force and continually create sophisticated technologies to meet t...
