New Fashion Design for 316 316l Stainless Steel Pipe - Stainless Steel Sheet and Coil – Type 304 Product – Sihe
New Fashion Design for 316 316l Stainless Steel Pipe - Stainless Steel Sheet and Coil – Type 304 Product – Sihe Detail:
Stainless Steel Sheet and Coil – Type 304 Product
Stainless steel sheet & plate is often referred to as corrosion-resistant steel since it does not stain, corrode or rust as easily as regular carbon steel. Stainless steel sheet & plate is the perfect is the perfect solution for applications that require the metal to have anti-oxidation qualities.
Grade Summary: Excellent mechanical properties, resistance to many corrosive agents. Useful where sanitation and cleanliness are important. Non magnetic in the annealed condition. Hardness and tensile strength can be increased by cold working, but modified by lowered carbon content providing good resistance to corrosion in welded construction where subsequent heat treatment is not practical. Grade 304L (L= low carbon) is the same as the above except it has an extra-low-carbon analysis, the advantage of which is that it precludes any harmful precipitation in the 800º F to 1500º F range, such as might otherwise occur in welding heavier sections.
Typical Applications: Dairy, beverage and food product handling/processing equipment. Used for handling acetic, nitric, and citric acids; organic and inorganic chemicals, dye stuff, crude and refined oils; instruments; hospital equipment; applications requiring welding.
Typical Chemical Analysis: * C – .08 Max. *Mn – 2.00 Max. *P – .04 Max. *S – .03 Max. *Si – 1.0 Max. *Cr – 18.00/20.00 *Ni – 8.00/10.50 *Cu – .75 Max. *Mo – .75 Max.
Product Line Description
Cold Rolled, Annealed No. 2B Finish
·Can also be furnished:
No. 3 Finish – Polished One or Two Sides
No. 4 Finish – Polished One or Two Sides
Non-Magnetic (May be Slightly magnetic when cold worked)
·Paper Interleaved or Vinyl Masked:
22 Gauge and Heavier
A.S.T.M. A240/A480 ASME SA-240
A.S.T.M. A262 Prac E
Applications:
- Rapid transit cars, buses, aircraft, cargo containers
- Retractor springs
- Hose clamps
- Conveyors
- Bottling machinery
- Jewelry
- Cryogenic vessels and components
- Still tubes
- Expand metal parts
- Mixing bowls
- Dryers
- Furnace parts
- Heat exchangers
- Paper mill equipment
- Oil refining equipment
- Textile industry
- Dyeing equipment
- Jet engine parts
- Welded storage tanks for organic chemicals
- Combustion chambers
- Furnace arch supports
- Kiln linings
- Smoke control ductwork
- Coal chutes
- Gauge parts
- Cutlery
- Fish hooks
- Glass molds
- Bank vaults
- Fasteners
- Skewers
- Dairy industry
- Burner and emission control components
- Recuperators
- Pipes, tubes
Stainless Steel Sheet & Plate Applications
Stainless steel sheet & plate have a variety of industrial applications, some of which include:
l Food Processing & Handling
l Heat Exchangers
l Chemical Process Vessels
l Conveyors
Features
1 commodity stainless steel sheet/Plate
2 material 201, 202, 304, 304L, 316, 316L, 309S, 310S, 317L, 321, 409, 409L, 410, 420, 430, etc
3 surface 2B, BA, HL, 4K, 6K, 8KNO. 1, NO. 2, NO. 3, NO. 4, NO. 5, and so on
4 standard AISI, ASTM, DIN, EN, GB, JIS, etc
5 specification
(1) thickness: 0.3mm- 100mm
(2) width: 1000mm, 1250mm, 1500mm, 1800mm, 2000mm, etc
(3) length: 2000mm2440mm, 3000mm, 6000mm, etc
(4) The specifications can be provided as clients’ requirement.
6 application
(1) Construction, decoration
(2) petroleum, chemical industry
(3) electrical appliances, automotive, aerospace
(4) house ware, kitchen appliances, cutlery, foodstuff
(5) surgical instrument
7 advantage
(1) High surface quality, clean, smooth finish
(2) Good corrosion resistance, durability than ordinary steel
(3) High strength and to deform
(4) Not easy to be oxidized
(5) Good welding performance
(6) The use of diversity
8 package
(1) Products are packed and labeled according to regulation
(2) According to customers’ requirement
9 delivery within 20 working days since we get the deposit,mainly according to your quantity and the ways of transportation.
10 payment T/T, L/C
11 shipment FOB/CIF/CFR
12 productivity 500tons/month
13 Note We can supply other grade products as customers’ requirement.
Standard & Material
1 ASTM A240 Standard
201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L
2 ASTM A480 Standard
302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974
3 JIS 4304-2005 Standard SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630
4 JIS G4305 Standard
SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A
Surface treatment
|
Itme |
Surface finishing |
Surface finishing methods |
Main application |
| NO.1 | HR | Heat treatment after hot rolling, pickling, or with treatment | For without the purpose of the surface gloss |
| NO.2D | Without the SPM | Method of heat treatment after cold rolling, pickling surface roller with wool or eventually a light rolling a matte surface processing | General materials,building materials. |
| NO.2B | After SPM | Giving No.2 processing materials appropriate method of cold light sheen | General materials, building materials ( most of the goods are processed ) |
| BA | Bright annealed | Bright heat treatment after cold rolling , in order to be more shiny, cold light effect | Automotive parts, home appliances, vehicles, medical equipment, food equipment |
| NO.3 | Shiny, coarse grain processing | The NO.2D or NO.2B processing timber No. 100-120 polishing abrasive grinding belt | Building materials, kitchen supplies |
| NO.4 | After CPL | The NO.2D or NO.2B processing timber No. 150-180 polishing abrasive grinding belt | Building materials, kitchen supplies, vehicles, medical equipment, food equipment |
| 240# | Grinding of fine lines | The NO.2D or NO.2B processing timber 240 polishing abrasive grinding belt | Kitchen appliances |
| 320# | More than 240 lines of grinding | The NO.2D or NO.2B processing timber 320 polishing abrasive grinding belt | Kitchen appliances |
| 400# | Close to BA luster | The MO.2B timber 400 polishing wheel polishing method | Building materials, kitchen utensils |
| HL(hair lines) | Polishing line having a long continuous processing | In a suitable size ( usually mostly No. 150-240 grit ) abrasive tape for as long as the hair, having a continuous processing method of polishing line | The most common building materials processing |
| NO.6 | NO.4 processing less than the reflection , the extinction | NO.4 processing material used for polishing Tampico brushing | Building materials, decorative |
| NO.7 | Highly accurate reflectance mirror processing | No. 600 of the rotary buff with a polishing | Building materials, decorative |
| NO.8 | Highest reflectivity mirror finish | Fine particles of abrasive material in order polishing , mirror polishing with a polishing | Building materials, decorative, mirrors |
Product detail pictures:
Related Product Guide:
Heat-conducting polymer cools hot electronic devices at 200 degrees Celsius | 304 Stainless Steel Capillary Tube
Better bomb-sniffing technology with new detector material | 304 Stainless Steel Capillary Tube
Sticking to the belief of "Creating products of high quality and making friends with people from all over the world", we always put the interest of customers in the first place for New Fashion Design for 316 316l Stainless Steel Pipe - Stainless Steel Sheet and Coil – Type 304 Product – Sihe , The product will supply to all over the world, such as: Cambodia, Mumbai, Florence, Wide selection and fast delivery to suit your needs! Our philosophy: Good quality, great service, keep improving. We've been looking forward that more and more oversea friends join in our family for further development near the future!
By Elvira from Mexico - 2016.09.26 12:12
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Darlene from Seychelles - 2016.11.20 15:58
Related products
-
OEM/ODM China 310 Steel Coil Tube - Top Grade ...
In the past few years, our firm absorbed and digested highly developed technologies equally at home and abroad. Meanwhile, our business staffs a group of experts devoted on the growth of Top Grade 316l Stainless Steel Welded Coiled Tubes/tubing/pipe, We now have been in operation for more than 10 years. We are dedicated to high quality products and solutions and consumer assistance. We invite you to definitely stop by our business for a personalized tour and advanced company guidance. In the ...
-
New Arrival China Welded Capillary Stainless St...
Like a result of ours specialty and repair consciousness, our enterprise has won a superb popularity amid buyers everywhere in the environment for High reputation Colorful Temperature Resistant Pneumatic Coiled Air Spiral Tubing Hose Kit, Thanks for taking your useful time to go to us and look ahead to have a nice cooperation with you. Like a result of ours specialty and repair consciousness, our enterprise has won a superb popularity amid buyers everywhere in the environment for Air Spiral H...
-
Best Price for Astm A270 Sanitary Pipe Stainles...
EN 1.4016 430 stainless steel polishing tube: Specification: Item:stainless steel welded polishing pipe Type:welded Standard:EN,ASTM A269 A554, JIS ,DIN Grade:201,202, 304, 304L,316, 316L,409, 430,etc Size:Round pipe:OD 8-219m Square Pipe: OD 10x10mm -150x150mm Rectangle Pipe:10x20mm to 120x180mm Thickness:0.2-4.0mm Pipe surface:180G, 320G, 400G, 500G, 600G,Satin, hairline, 2B,BA, mirror,8K Pipe length:5.8m 6M 11.85M 12m Application: 1.Decoration usage(road,bridge handrail,railing,bus stop,ai...
-
Discountable price Good Quality Seamless A312 G...
Liaocheng sihe stainless steel material limited company is a manufacturer for stainless steel coiled tube ,produces stainless steel coiled tubing including Inconel 625 Tubing are the High Performance Alloy tubing. Alloy 625 Tubing is a material with excellent resistance to pitting, crevice and corrosion cracking. Nickel 625 tubing is highly resistant in a wide range of organic and mineral acids. Good high temperature strength. These tubing are High resistance to oxidation at elevated temperat...
-
Newly Arrival Uns S17400 Seamless Stainless Ste...
About specification for 304 stainless steel material : Introduction Grade 304 is the standard “18/8″ stainless; it is the most versatile and most widely used stainless steel, available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics. The balanced austenitic structure of Grade 304 enables it to be severely deep drawn without intermediate annealing, which has made this grade dominant in the manufacture of drawn s...
-
2017 High quality Ss304 Stainless Steel Seamles...
STAINLESS STEEL COIL TUBE SUPPLIERS STAINLESS STEEL COIL TUBE MANUFACTURER IN CHINA, STAINLESS STEEL COIL TUBE 304, STAINLESS STEEL 304L COIL TUBE, STAINLESS STEEL COILED TUBING SUPPLIERS 316 STAINLESS STEEL COIL TUBING, STAINLESS STEEL 316L COIL TUBE DEALER, STAINLESS STEEL 201 COIL TUBES SUPPLIER, SS COIL TUBE EXPORTER, STAINLESS STEEL WELDED COIL TUBE, STEEL COIL TUBING LIAOCHENG SIHE STAINLESS STEEL is privately owned Supplier of Stainless Steel Coil Tube, stainless steel welded pipe ma...
