Pìob mionaideachd stàilinn gun staoin JIS DIN alloy 625
Tuairisgeul Goirid:
Pìob/TIÙB Stàilinn gun Stàilinn
1. : Ìre: 201 202 304 304l 316 316l
2. Coitcheann: ASTM DIN JIS AISI GB
3. Uachdar: 2B BA ÀIR.4 Sgàthan 320# 380# 400#600# 800#
4. Fad: 6M 11.5 M 12M no a rèir na riatanasan agad.
5.OD: Tiùb Cruinn 9.52-219MM Retangle: 10 * 10-150-150
6. Pacadh a-staigh
Poca plastaig
7. Pacadh a-muigh: Pacadh carton / fighte / fiodha
8.Od: +/- 0.2mm, Tiughas: +/- 0.02mm
Toraidhean coil stàilinn gun staoin:
tiùb coil stàilinn gun smal
coil tiùb stàilinn gun smal
pìoban coil stàilinn gun smal
pìob coil stàilinn gun staoin
solaraichean tiùb coil stàilinn gun staoin
luchd-saothrachaidh tiùb coil stàilinn gun staoin
coil pìoba stàilinn gun staoin
Pìob mionaideachd stàilinn gun staoin JIS DIN alloy 625
Inbhe: ASTM A-312, ASTM A-269, ASTM A-632, ASTM A-213
DIN 17458, DIN 17456 JIS G3463, JIS G3459, JIS G3448
Ìre Stuth: 201/202/304/316
Trast-thomhas a-muigh: 0.1mm–8mm
Tiughas: 0.05mm – 2.1mm
Fad: 2440mm, 3050mm, 5800mm, 6000mm, 6100mm no mar iarrtas luchd-ceannach
Fulangas: a) Trast-thomhas a-muigh: +/- 0.2mm
b) Tiughas: +/- 10% NO mar iarrtas luchd-ceannach
c) Fad: +/- 10mm
Uachdar: Satin / Loidhne fuilt: 180 #, 320 #
Pòlach: 400 #, 600 #, 800 # no uachdar sgàthan
PACADH
Poca plastaig / pacadh fighte (cuir fiosrachadh pacaidh thugainn ma tha riatanasan eile agad)
An co-dhèanamh ceimigeach airson pìob mionaideachd stàilinn gun smal 825:
An Co-dhèanamh Ceimigeach airson pìob mionaideachd stàilinn gun staoin alloy 625:
|
| C | Mn | Mo | Cr | Ni | Cu | Ti | P | S | Si | V | Al |
| Min | - | - | 8,000 | 20,000 | - | - | - | - | - | - | - | - |
| Max | 0.100 | 0.500 | 10,000 | 23,000 | 58,000 | - | 0.400 | 0.015 | 0.015 | - | - | 0.400 |
Feartan Meacanaigeach
| Neart teannachaidh | 827 MPa min | 120,000 psi aig a’ char as lugha |
| Neart Toraidh | 414 MPa min | - |
| Leudachadh Iomlan Fo Luchd | 20,000% | - |
| Cruas | 35 HRC as àirde | - |
Tagradh: co-phàirtean niùmatach uisgeachaidh, innealan snàithleach ceimigeach aodaich, meidigeach is ceimigeach, slàinteachas bìdh, ionnsramaidean, goileadairean, soithichean cuideam agus gnìomhachasan meacanaigeach is dealanach eile.
Ma tha thu airson tuilleadh fiosrachaidh fhaighinn mun phìob/tiùb stàilinn gun staoin, cuir fios thugainn.
| Tiùb Stàilinn Ceàrnagach (mm) | Tiùb Stàilinn Ceart-cheàrnach (mm) | Tiùb Stàilinn Cruinn (mm) |
| 10 × 10 × 0.6 ~ 3.0 | 10 × 20 × 0.6 ~ 3.0 | 6 × 0.6 ~ 1.0 |
| 15 × 15 × 0.6 ~ 3.0 | 20 × 30 × 0.6 ~ 3.0 | 12 × 0.6 ~ 1.5 |
| 20 × 20 × 0.6 ~ 3.0 | 20 × 40 × 0.6 ~ 3.0 | 13 × 0.6 ~ 1.5 |
| 25 × 25 × 0.6 ~ 3.0 | 25 × 50 × 0.6 ~ 3.5 | 16 × 0.6 ~ 2.0 |
| 30 × 30 × 0.6 ~ 3.5 | 30 × 50 × 0.6 ~ 3.5 | 19 × 0.6 ~ 3.0 |
| 40 × 40 × 0.6 ~ 3.5 | 40 × 60 × 0.6 ~ 3.5 | 20 × 0.6 ~ 3.0 |
| 50 × 50 × 0.6 ~ 3.5 | 40 × 80 × 0.6 ~ 3.5 | 22 × 0.6 ~ 3.0 |
| 60 × 60 × 0.6 ~ 3.5 | 60 × 80 × 1.0 ~ 6.0 | 25 × 0.6 ~ 3.0 |
| 70 × 70 × 0.6 ~ 3.5 | 50 × 100 × 1.0 ~ 6.0 | 27 × 0.6 ~ 3.0 |
| 75 × 75 × 0.6 ~ 3.5 | 60 × 120 × 1.0 ~ 6.0 | 32 × 0.6 ~ 3.0 |
| 80 × 80 × 1.0 ~ 6.0 | 80 × 120 × 2.0 ~ 8.0 | 40 × 0.6 ~ 3.5 |
| 100 × 100 × 2.0 ~ 8.0 | 80 × 160 × 2.0 ~ 8.0 | 38 × 0.6 ~ 3.0 |
| 120 × 120 × 2.0 ~ 8.0 | 100 × 150 × 2.0 ~ 8.0 | 48 × 0.6 ~ 3.5 |
| 150 × 150 × 2.0 ~ 8.0 | 100 × 200 × 2.0 ~ 8.0 | 60 × 0.6 ~ 3.5 |
| 200 × 200 × 4.0 ~ 16.0 | 150 × 250 × 4.0 ~ 12.0 | 76 × 0.6 ~ 3.5 |
| 250 × 250 × 4.0 ~ 16.0 | 200 × 300 × 4.0 ~ 16.0 | 89 × 1.0 ~ 6.0 |
| 300 × 300 × 4.0 ~ 16.0 | 300 × 400 × 4.0 ~ 16.0 | 104 × 1.0 ~ 6.0 |
| 400 × 400 × 4.0 ~ 16.0 | 300 × 500 × 4.0 ~ 16.0 | 114 × 1.0 ~ 6.0 |
Feartan corporra pìob snasail stàilinn gun staoin:
| Ìre | Co-dhèanamh, % | |||||||||
| Carbon, | Manga- | Fos- | Sulfar, | Sileacon, | Nicil | Cròmium | Molaibdenum | Titanium | Columbium + Tantalum | |
| Austenitic | ||||||||||
| 301 | 0.15 | 2.00 | 0.040 | 0.030 | 1.00 | 6.0–8.0 | 16.0–18.0 | … | … | … |
| 302 | 0.15 | 2.00 | 0.040 | 0.030 | 1.00 | 8.0–10.0 | 17.0–19.0 | … | … | … |
| 304 | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 8.0–11.0 | 18.0–20.0 | … | … | … |
| 304L | 0.035A | 2.00 | 0.040 | 0.030 | 1.00 | 8.0–13.0 | 18.0–20.0 | … | … | … |
| 305 | 0.12 | 2.00 | 0.040 | 0.030 | 1.00 | 10.0–13.0 | 17.0–19.0 | … | … | … |
| 309S | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 12.0–15.0 | 22.0–24.0 | … | … | ... |
| 309S-Cb | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 12.0–15.0 | 22.0–24.0 | … | … | B |
| 310S | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 19.0–22.0 | 24.0–26.0 | … | … | … |
| 316 | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 10.0–14.0 | 16.0–18.0 | 2.0–3.0 | … | … |
| 316L | 0.035A | 2.00 | 0.040 | 0.030 | 1.00 | 10.0–15.0 | 16.0–18.0 | 2.0–3.0 | … | … |
| 317 | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 11.0–14.0 | 18.0–20.0 | 3.0–4.0 | … | … |
| 321 | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 9.0–13.0 | 17.0–20.0 | … | C | … |
| 330 | 0.15 | 2.00 | 0.040 | 0.030 | 1.00 | 33.0–36.0 | 14.0–16.0 | … | … | … |
| 347 | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 9.0–13.0 | 17.0–20.0 | … | … | B |
| 429 | 0.12 | 1.00 | 0.040 | 0.030 | 1.00 | 0.50 aig a’ char as àirde | 14.0–16.0 | … | … | … |
| 430 | 0.12 | 1.00 | 0.040 | 0.030 | 1.00 | 0.50 aig a’ char as àirde | 16.0–18.0 | … | … | … |
| 430-Ti | 0.10 | 1.00 | 0.040 | 0.030 | 1.00 | 0.075 aig a’ char as àirde | 16.0–19.5 | … | 5 × C mionaid, | … |
| 0.75 aig a’ char as àirde | ||||||||||
▼Pìoban coileach stàilinn gun staoin / pìoban coileach ìre stuth:
| Na Stàitean Aonaichte | A' GHEARMAILT | A' GHEARMAILT | AN FHRAING | IAPAN | AN EADAILT | AN T-SUAIN | RA | an EU | AN SPAINN | AN RUIS |
| AISI | DIN 17006 | WN 17007 | AFNOR | JIS | AONAICH | SIS | BSI | EURONORM | ||
| 201 | SUS 201 | |||||||||
| 301 | X 12 CrNi 17 7 | 1.4310 | Z 12 CN 17-07 | SUS 301 | X 12 CrNi 1707 | 23 31 | 301S21 | X 12 CrNi 17 7 | X 12 CrNi 17-07 | |
| 302 | X 5 CrNi 18 7 | 1.4319 | Z 10 CN 18-09 | SUS 302 | X 10 CrNi 1809 | 23 31 | 302S25 | X 10 CrNi 18 9 | X 10 CrNi 18-09 | 12KH18N9 |
| 303 | X 10 CrNiS 18 9 | 1.4305 | Z 10 CNF 18-09 | SUS 303 | X 10 CrNiS 1809 | 23 46 | 303S21 | X 10 CrNiS 18 9 | X 10 CrNiS 18-09 | |
| 303 Se | Z 10 CNF 18-09 | SUS 303 Se | X 10 CrNiS 1809 | 303S41 | X 10 CrNiS 18-09 | 12KH18N10E | ||||
| 304 | X 5 CrNi 18 10 X 5 CrNi 18 12 | 1.4301 1.4303 | Z 6 CN 18-09 | SUS 304 | X 5 CrNi 1810 | 23 32 | 304S15 304S16 | X 6 CrNi 18 10 | X 6 CrNi 19-10 | 08KH18N10 06KH18N11 |
| 304 N | SUS 304N1 | X 5 CrNiN 1810 | ||||||||
| 304 H | SUS F 304H | X 8 CrNi 1910 | X 6 CrNi 19-10 | |||||||
| 304 L | X2 CrNi1811 | 1.4306 | Z 2 CN 18-10 | SUS 304L | X 2 CrNi 1911 | 23 52 | 304S11 | X3 CrNi1810 | X2 CrNi 19-10 | 03KH18N11 |
| X 2 CrNiN 18 10 | 1.4311 | Z 2 CN 18-10-Az | SUS 304LN | X 2 CrNiN 1811 | 23 71 | |||||
| 305 | Z 8 CN 18-12 | SUS 305 | X 8 CrNi 1812 | 23 33 | 305S19 | X8 CrNi1812 | X8 CrNi 18-12 | |||
| Z 6 CNU 18-10 | SUS XM7 | X 6 CrNiCu 18 10 4 Kd | ||||||||
| 309 | X 15 CrNiS 20 12 | 1.4828 | Z 15 CN 24-13 | SUH 309 | X 16 CrNi 2314 | 309S24 | X 15 CrNi 23 13 | |||
| 309 S | SUS 309S | X6 CrNi 2314 | X 6 CrNi 22 13 | |||||||
| 310 | X 12 CrNi 25 21 | 1.4845 | SUH 310 | X 22 CrNi 2520 | 310S24 | 20KH23N18 | ||||
| 310 S | X 12 CrNi 25 20 | 1.4842 | Z 12 CN 25-20 | SUS 310S | X 5 CrNi 2520 | 23 61 | X 6 CrNi 25 20 | 10KH23N18 | ||
| 314 | X 15 CrNiSi 25 20 | 1.4841 | Z 12 CNS 25-20 | X 16 CrNiSi 2520 | X 15 CrNiSi 25 20 | 20KH25N20S2 | ||||
| 316 | X 5 CrNiMo 17 12 2 | 1.4401 | Z 6 CND 17-11 | SUS 316 | X 5 CrNiMo 1712 | 23 47 | 316S31 | X 6 CrNiMo 17 12 2 | X 6 CrNiMo 17-12-03 | |
| 316 | X 5 CrNiMo 17 13 3 | 1.4436 | Z 6 CND 17-12 | SUS 316 | X 5 CrNiMo 1713 | 23 43 | 316S33 | X 6 CrNiMo 17 13 3 | X 6 CrNiMo 17-12-03 | |
| 316 F | X 12 CrNiMoS 18 11 | 1.4427 | ||||||||
| 316 N | SUS 316N | |||||||||
| 316 U | SUS F 316H | X8 CrNiMo 1712 | X 5 CrNiMo 17-12 | |||||||
| 316 U | X8 CrNiMo 1713 | X 6 CrNiMo 17-12-03 | ||||||||
| 316 L | X 2 CrNiMo 17 13 2 | 1.4404 | Z 2 CND 17-12 | SUS 316L | X 2 CrNiMo 1712 | 23 48 | 316S11 | X3 CrNiMo 17 12 2 | X 2 CrNiMo 17-12-03 | 03KH17N14M2 |
| X 2 CrNiMoN 17 12 2 | 1.4406 | Z 2 CND 17-12-Az | SUS 316LN | X 2 CrNiMoN 1712 | ||||||
| 316 L | X 2 CrNiMo 18 14 3 | 1.4435 | Z 2 CND 17-13 | X2 CrNiMo 1713 | 23 53 | 316S13 | X 3 CrNiMo 17 13 3 | X 2 CrNiMo 17-12-03 | 03KH16N15M3 | |
| X 2 CrNiMoN 17 13 3 | 1.4429 | Z 2 CND 17-13-Az | X 2 CrNiMoN 1713 | 23 75 | ||||||
| X 6 CrNiMoTi 17 12 2 | 1.4571 | Z6 CNDT 17-12 | X 6 CrNiMoTi 1712 | 23 50 | 320S31 | X 6 CrNiMoTi 17 12 2 | X 6 CrNiMoTi 17-12-03 | 08KH17N13M2T 10KH17N13M2T | ||
| X 10 CrNiMoTi 18 12 | 1.4573 | X 6 CrNiMoTi 1713 | 320S33 | X 6 CrNiMoTI 17 13 3 | X 6 CrNiMoTi 17-12-03 | 08KH17N13M2T 10KH17N13M2T | ||||
| X 6 CrNiMoNb 17 12 2 | 1.4580 | Z 6 CNDNb 17-12 | X₆ CrNiMoNb 1712 | X 6 CrNiMoNb 17 12 2 | 08KH16N13M2B | |||||
| X 10 CrNiMoNb 18 12 | 1.4583 | X₆ CrNiMoNb 1713 | X 6 CrNiMoNb 17 13 3 | 09KH16N15M3B | ||||||
| 317 | SUS 317 | X 5 CrNiMo 1815 | 23 66 | 317S16 | ||||||
| 317 L | X 2 CrNiMo 18 16 4 | 1.4438 | Z 2 CND 19-15 | SUS 317L | X 2 CrNiMo 1815 | 23 67 | 317S12 | X3 CrNiMo 18 16 4 | ||
| 317 L | X 2 CrNiMo 18 16 4 | 1.4438 | Z 2 CND 19-15 | SUS 317L | X2 CrNiMo 1816 | 23 67 | 317S12 | X3 CrNiMo 18 16 4 | ||
| 330 | X 12 NiCrSi 36 16 | 1.4864 | Z 12NCS 35-16 | SUH 330 | ||||||
| 321 | X 6 CrNiTi 18 10 X 12 CrNiTi 18 9 | 1.4541 1.4878 | Z 6 CNT 18-10 | SUS 321 | X 6 CrNiTi 1811 | 23 37 | 321S31 | X 6 CrNiTi 18 10 | X 6 CrNiTi 18-11 | 08KH18N10T |
| 321 Uair | SUS 321H | X8 CrNiTi 1811 | 321S20 | X 7 CrNiTi 18-11 | 12KH18N10T | |||||
| 329 | X 8 CrNiMo 27 5 | 1.4460 | SUS 329J1 | 23 24 | ||||||
| 347 | X 6 CrNiNb 18 10 | 1.4550 | Z 6 CNNb 18-10 | SUS 347 | X 6 CrNiNb 1811 | 23 38 | 347S31 | X 6 CrNiNb 18 10 | X 6 CrNiNb 18-11 | 08KH18N12B |
| 347 Uair | SUS F 347H | X8 CrNiNb 1811 | X 7 CrNiNb 18-11 | |||||||
| 904L | 1.4939 | Z 12 CNDV 12-02 | ||||||||
| X 20 CrNiSi 25 4 | 1.4821 | |||||||||
| UNS31803 | X 2 CrNiMoN 22 5 | 1.4462 | ||||||||
| UNS32760 | X 3 CrNiMoN 25 7 | 1.4501 | Z 3 CND 25-06Az | |||||||
| 403 | X 6 Cr 13 X 10 Cr 13 X 15 Cr 13 | 1.4000 1.4006 1.4024 | Z 12 C 13 | SUS 403 | X 12 Cr 13 | 23 02 | 403S17 | X 10 Cr 13 X 12 Cr 13 | X 6 Cr 13 | 12Kh13 |
| 405 | X 6 CrAl 13 | 1.4002 | Z 6 CA 13 | SUS 405 | X 6 CrAl 13 | 405S17 | X 6 CrAl 13 | X 6 CrAl 13 | ||
| X 10 CrAl 7 | 1.4713 | Z 8 CA 7 | X 10 CrAl 7 | |||||||
| X 10 CrAl 13 | 1.4724 | X 10 CrAl 12 | 10Kh13SYu | |||||||
| X 10 CrAl 18 | 1.4742 | X 10 CrSiAl 18 | 15Kh18SYu | |||||||
| 409 | X 6 CrTi 12 | 1.4512 | Z 6 CT 12 | SUH 409 | X 6 CrTi 12 | 409S19 | X 5 CrTi 12 | |||
| X2 CrTi 12 | ||||||||||
| 410 | X 6 Cr 13 X 10 Cr 13 X 15 Cr 13 | 1.4000 1.4006 1.4024 | Z 10 C 13 Z 12 C 13 | SUS 410 | X 12 Cr 13 | 23 02 | 410S21 | X 12 Cr 13 | X 12 Cr 13 | 12Kh13 |
| 410 S | X 6 Cr 13 | 1.4000 | Z 6 C 13 | SUS 410S | X 6 Cr 13 | 23 01 | 403S17 | X 6 Cr 13 | 08Kh13 |
Factaraidh
Buannachd càileachd:
Tha càileachd ar bathar airson an loidhne smachd ann an roinn na h-ola is a’ ghasa air a dhearbhadh chan ann a-mhàin rè a’ phròiseas saothrachaidh fo smachd ach cuideachd tro dheuchainn air bathar crìochnaichte. Am measg nan deuchainnean àbhaisteach tha:
1. Deuchainnean neo-sgriosail
2. Deuchainnean uisge-statach
3. Smachdan crìochnachaidh uachdar
4. Tomhaisean cruinneas tomhasach
5. Deuchainnean lasair is cònaidh
6. Deuchainn air feartan meacanaigeach agus ceimigeach
Tiùb cailleach tagraidh
1) Gnìomhachas innealan meidigeach
2) smachd teothachd gnìomhachais le stiùireadh teòthachd, mothachairean air an cleachdadh le pìob, teirmiméadar tiùba
3) Tiùb cridhe gnìomhachas cùram peann
4) antenna meanbh-tiùba, diofar sheòrsaichean antenna stàilinn gun smal beag mionaideach
5) Le measgachadh de chaipileidean stàilinn gun smal dealanach le trast-thomhas beag
6) Punch snàthaid seudaireachd
7) Uaireadairean, dealbh
8) Tiùb antenna càr, antennas bàr a’ cleachdadh phìoban, tiùb antenna
9) Uidheam gràbhaladh leusair gus tiùb stàilinn gun smal a chleachdadh
10) Uidheam iasgaich, goireasan, Yugan a-mach le seilbh air
11) Daithead le capillary stàilinn gun smal
12) a h-uile seòrsa peann-làimhe fòn-làimhe peann-làimhe coimpiutair
13) Gnìomhachas phìoban teasachaidh, gnìomhachas ola
14) Clò-bhualadairean, snàthad bogsa sàmhach
15) Tarraing tiùb stàilinn gun smal leaghte dùbailte a thathas a’ cleachdadh ann an uinneagan ceangailte
16) Measgachadh de phìoban stàilinn gun smal gnìomhachais le trast-thomhas beag
17) Sgaoileadh mionaideach le snàthaidean stàilinn gun smal
18) Micreofon, fònaichean-cluaise agus micreofon gus tiùb stàilinn gun smal a chleachdadh, agus mar sin air adhart
Toraidhean co-cheangailte
-
Pìob mionaideachd stàilinn gun staoin airson ìre aloidh 625
Toraidhean coilich stàilinn gun staoin: tiùb coilich stàilinn gun staoin tiùb stàilinn gun staoin coilich stàilinn gun staoin tiùban coilich stàilinn gun staoin pìob coilich stàilinn gun staoin solaraichean tiùb coilich stàilinn gun staoin luchd-saothrachaidh tiùb coilich stàilinn gun staoin coilich pìob stàilinn gun staoin Pìob mionaideach stàilinn gun staoin airson ìre aloidh 625: Inbhe: ASTM A-312, ASTM A-269, ASTM A-632, ASTM A-213 DIN 17458, DIN17456 JIS G3463, JIS G3459, JIS G3448 Ìre Stuth: 201/202/304/316 Trast-thomhas a-muigh: 0.1mm–8mm Tiughas: 0.05mm – 2.1mm Fad...
-
Pìob mionaideachd stàilinn gun staoin astm 625
Toraidhean coil stàilinn gun staoin: tiùb coil stàilinn gun staoin tiùb stàilinn gun staoin coil stàilinn gun staoin tiùban coil stàilinn gun staoin pìob coil stàilinn gun staoin solaraichean tiùb coil stàilinn gun staoin luchd-saothrachaidh tiùb coil stàilinn gun staoin coil pìob stàilinn gun staoin ASTM Pìob mionaideach stàilinn gun staoin airson ìre aloidh 625: Inbhe: ASTM A-312, ASTM A-269, ASTM A-632, ASTM A-213 DIN 17458, DIN17456 JIS G3463, JIS G3459, JIS G3448 Ìre Stuth: 201/202/304/316/ALOI 625 Trast-thomhas a-muigh: 0.1mm–8mm Tiughas: 0.05mm &...
