Disgrifiad cynhyrchion

Tiwb Coiled Dur Di-staen gradd 304, dur di-staen 304Tiwb Coil Capilaraidd, 304 Llinell Rheoli Hydrolig, Llinell Reoli Tiwbiau Coiled Duplex 2205, Monel400, Inconel 825Llinell Reoli tiwbiau coiliog. Llinell Reoli dur di-staen, tiwb plygu dur di-staen, pibell wedi'i rholio â dur. plygu tiwbiau dur di-staen yn goil,

Gradd Gysylltiedig:

• Gradd Gyffredin: TP304 TP304L TP304H TP321 TP321H TP316L TP316SS
• TP316Ti TP347 TP347H TP317L TP309S TP310S 904L
• Safon Rwsiaidd: 08X18H10 03X18H11 10X17H13M2T 03X17H13M2 12X18H10T 08X18H10T 08X18H12B
• Safon Almaenig: 1.4301 1.4306 1.4541 1.4404 1.4571 1.4550
• Safon Japaneaidd: SUS304 SUS304L SUS321 SUS316L
• SUS316Ti SUS347 SUS800 SUS840
• Gradd Dwbl: 304/304L 316/316L 321/321H 347/347H
• Dur uwch-ddwplecs: 2205 2304 S31803 S32750
• Inconel 600, Inconel 601, Inconel 625, Inconel 725, Incoloy 800, Incoloy 800H, Incoloy 800HT,
• Incoloy 825, Incoloy 901, Incoloy 925, Incoloy 926 ac ati.

Pwysedd a Hyd Llinell Reoli Dur Di-staen Safonol:

• Disgrifiad Cynnyrch Llinell Reoli Dur Di-staen Semless:

DEFNYDDIAU Cysylltiedig

1. Acwbigo Meddygol gyda Llinell Rheoli Tiwbiau Coiled
2. Offeryniaeth pwysedd uchel gyda Llinell Rheoli Tiwbiau Coiled,
3. Archwilio glo gyda Llinell Reoli dur di-staen
4. Thermostat gyda Llinell Reoli
5. Peiriant cwrw gyda Llinell Reoli dur di-staen
6. Offer dŵr yfed gyda Llinell Reoli dur di-staen
7. 7) Falf ehangu Danfoss gyda Llinell Rheoli Tiwbiau Coiled dur di-staen
8. 5. Manylebau: 1. Diamedr allanol: 0.3mm-10mm Goddefgarwch: 0.005mm-0.01

9. Tiwb Capilari Dur Di-staen
   Tiwb capilar dur di-staen 304
   Tiwb capilar dur di-staen 316L
   0.25*0.08	1.4*0.4	2.3*0.2	3.2*0.25	4.5+0.7	6*0.45	8*0.3	11*0.5	0.8*0.2	10*1
   0.3*0.1	1.5*0.1	2.3*0.25	3.2*0.3	4.5*0.75	6*0.5	8*0.4	11*1	0.85*0.175.	12*0.5
   0.4*0.1	1.S*0.125	2.3*0.3	3.2*0.35	4.5*0.8	6*0.6	8*0.45	11*1.5	1.1*0.2	12*1
   0.5*0.1	1.5*0.15	2.4*0.15	3.2*0.4	4.5*0.9	6*0.7	8*0.5	11*2	1.1*0.3	12*1.5
   0.5*0.125	1.5*0.2	2.4*0.2	3.2*0.5	4.5*1	6*0.8	8*0.6	11.1*0.4	1.2*0.135	12*2.0
   0.5*0.15	1.5*0.25	2.4*0.25	3.2*0.6	4.7*0.2	6+0.9	8*0.7	12*0.2	1.6*0.25 ·	12.8*1.6
   0.6*0.1	1.5*0.3	2.4*0.3	3.2*0.8	4.7*0.25	6*1.0	B*0.8	12*0.25	1.9*0.1	14*0.5
   0.6*0.125	1.5+0.35	2.4*0.4	3.4*0.5	4.7*0.3	6*1.2	8*0.9	12*0.3	2*0.3	14+1.5
   0.6*0.15	1.5*0.4	2.4*0.5	3.5*0.15	4.8*0.125	6*1.25	8*1	12*0.4	2*0.4	14*2.0
   0.63*0.15	1.S+0.45	2.4*0.6	3.5+0.2	4.8*0.2	6*1.5	8*1.2	12*0.5	2*0.5	15+0.5
   0.7*0.1	1.5*0.5	2.4*0.7	3.5*0.25	4.8*0.25	6*2	8*1.5	12*1	2*0.6	15*1.5
   0.7*0.125	1.6*0.1	2.4*0.7S	3.5*0.3	4.8*0.3	6.3S*0.3	8*2	12.3*0.4	2.5*0.25	15*2
   0.7*0.15	1.6*0.125	2.4*0.8	3.5*0.4	4.8*0.5	6.35*0.5	8*2.5	12.7*0.3	2.5*o.3	16*0.5
   0.7*0.2	1.6*0.15	2.5*0.1	3.5*0.5	5*0.1	6.35*0.7	8.5*0.2	13*0.5	2.5*0.5	16*1.0
   0.8*0.1	1.6*0.2	2.5*0.15	3.5+0.55	5+0.15	6.35*1.0	8.5*0.25	13*1	3*0.5	16*1.5
   0.8*0.125	1.6*0.25	2.5*0.2	3.5*0.7	5*0.2	6.4*0.225	8.5*0.3	13*1.5	3*0.8	16*2.0
   0.8*0.15	1.6*0.3	2.5*0.25	3.5*0.8	s+0.25	6.5*0.2	8.5+0.4	13*2	3*1	17*1.5
   0.8*0.2	1.6*0.35	2.5*0.3	3.5*1.0	5*0.3	6.5*0.25	8.5*0.5	13.5*0.5	4*0.3	17*2.0
   0.8*0.25	1.6*0.4	2.5*0.35	3.5*1.15	s*0.35	6.5*0.3	8.S*1.0	14*0.25	4*0.5	18*1.5
   0.9*0.1	1.65*0.3	2.5*0.4	3.6*0.15	5*0.4	6.5*0.4	8.5*1.3	14*0.3	4*1	18*2.0
   0.9*0.15	1.7*0.1	2.5*0.45	3.7*0.15	5+0.45	6.5+0.5	8.5*1.5	14*0.5	4.8*0.15	19*1.5
   0.9*0.2	1.7*0.15	2.5*0.5	3.7*0.2	5*0.5	6.5*0.6	8.9*1.4	14*1	5*0.5	19*2.0
   0.9*0.25	1.7*0.2	2.5*0.6	3.7*0.5	S*0.6	6.5*0.7	9*0.2	14.2*0.2	S*1	20*1.0
   1.0*0.1	1.7*0.25	2.5*0.65	3.8*0.2	5*0.7	6.5*0.8	9*0.25	15*0.3	5.5*1.75	20*1.5
   1.0*0.125	1.7*0.3	2.5*0.7	3.8*0.25	S*0.75	6.5*0.9	9*0.3	15*0.5	6*0.15	20*2.0
   1.0+0.15	1.8*0.1	2.5*0.85	3.8+0.3	5*0.8	6.5*1	9*0.4	15*1	6*0.25	20*2.5
   1.0*0.2	1.8*0.15	2.6*0.15	3.9*0.2	5*0.9	6.5*1.3	9*0.5	16*0.5	6*0.3	21*1.0
   1.0*0.25	1.8*0.2	2.6+0.2	4+0.1	5*1.0	6.7*0.5	9*0.6	16*1	6*0.5	22*1.5
   1.0*0.3	1.8*0.25	2.6*0.3	4*0.15	5*1.2	6.8*0.15	9*0.7	17*0.5	6*0.85	25*1.5
   1.0*0.35	1.8*0.3	2.6*0.5	4*0.2	5*1.5	7*0.15	9*0.8	17*1	6*1	28.6*1.5
   1.1*0.1	1.8*0.35	2.65*0.15	4*0.25	5.2*0.2	7*0.2	9*0.9	18*0.5	7*0.3
   1.1*0.12	1.8*0.4	2.7+0.15	4+0.3	5.2*0.3	7*0.25	9*1	18*1.0	7*0.5
   1.1*0.125	1.9*0.1	2.7*0.2	4*0.35	5.2*0.45	7*0.3	9*1.5	19*0.5	7*1.0
   1.1*0.15	1.9*0.15	2.7*0.3	4*0.4	5.2*0.5	7*0.35	9*2	19*1.0	8*0.5
   1.1*0.2	1.9*0.2	2.8*0.15	4*0.45	5.4*0.2	7*0.4	9.5*0.25	20*0.5	8*1
   1.1*0.25	1.9*0.25	2.8*0.2	4*0.5	5.45*0.275	7*0.45	9.5*0.3	21*0.5	9*0.5
   1.2*0.1	2*0.1	2.8*0.25	4*0.6	5.5*0.15	7*0.5	9.5*0.5		9*1
   1.2*0.12	2*0.125	2.8*0.3	4*0.7	5.5*0.2	7*0.6	9.5*0.7		10*0.5
   1.2*0.125	2*0.15	2.8+0.5	4*0.75	5.5*0.25	7*0.7	9.5*1		10*1
   1.2*0.15	2*0.2	2.8*0.7	4*0.8	5.5*0.3	7*0.8	9.5*1.5
   1.2*0.2	2*0.25	2.9+0.3	4+0.9	5.5*0.4	7*0.9	10*0.2
   1.2*0.25	2*0.3	3*0.1	4*1.0	5.5*0.5	7*1.0	10*0.25
   1.2*0.3	2*0.35	3*0.15	4*1.25	5.5*0.6	7*1.2	10*0.3
   1.2*0.4	2*0.4	3*0.2	4*1.5	5.5*0.7	7*1.5	10*0.4
   1.3*0.1	2*0.4S	3*0.25	4.2*0.2	5.5*0.75	7*2	10*0.5
   1.3*0.12	2*0.5	3*0.3	4.2*0.25	5.5*0.8	7.5*0.2	10*0.6
   1.3*0.125	2*0.6	3*0.35	4.2*0.3	5.5*1	7.5*0.25	10*0.7
   1.3*0.135	2*0.7	3*0.4	4.2*0.4	5.6*0.85	7.5*0.3	10*0.8
   1.3*0.15	2.1*0.15	3*0.5	4.2*0.5	5.7*0.2	7.5*0.4	10*0.9
   1.3+0.175	2.1*0.2	3*0.6	4.3*0.9	5.7*0.3	7.5*0.5	10*1.0
   1.3*0.2	2.1*0.25	3*0.7	4.4*0.45	5.8*0.15	7.5*0.6	10*1.5
   1.3*0.25	2.1*0.65	3*0.75	4.4*0.5	5.8*0.2	7.5+0.7	10*2
   1.3*0.3	2.2*0.15	3*0.8	4.5*0.15	5.8*0.5	7.5*0.8	10*2.5
   1.4*0.1	2.2*0.2	3*0.9	4.5*0.2	5.8*0.7	7.5*0.9	10.3*0.2
   1.4*0.15	2.2*0.25	3*1.0	4.5*0.25	6*0.15	7.5*1.0	10.8*0.2			meddal
   1.4*0.2	2.2*0.3	3*1.1	4.5+0.3	6*0.2	7.8*0.5	11*0.2			1.5*0.15
   1.4*0.25	2.2*0.5	3*1.2	4.5*0.4	6*0.25	8*0.15	11*0.25			2*0.5
   1.4*0.3	2.3*0.125	3.2*0.15	4.5*0.5	6*0.3	8*0.2	11*0.3			2.5*0.5
   1.4*0.35	2.3*0.15	3.2*0.2	4.5*0.6	6*0.4	8*0.25	11*0.4			5*0.5