Sampla Saor in Aisce ón Monarcha Feadánra Ribeach Snasta SS304 1/4″Od*0.049″Wt Soláthraí sa tSín
Mar thoradh ar ár speisialtacht agus ár gcomhfhios seirbhíse, tá stádas den scoth bainte amach ag ár bhfiontar i measc ceannaitheoirí ar fud an domhain le haghaidh sampla Monarcha Saor in Aisce SS304 Snasta Capillary Tubing 1/4″Od*0.049″Wt Supplier sa tSín, Mar shaineolaí atá speisialaithe sa réimse seo, táimid tiomanta d'aon fhadhb a bhaineann le cosaint ardteochta d'úsáideoirí a réiteach.
Mar thoradh ar ár speisialtacht agus ár gcomhfhios seirbhíse, tá stádas den scoth bainte amach ag ár bhfiontar i measc ceannaitheoirí ar fud an domhain.Feadánra Insteallta Ceimiceach Poll Dúnta 304 na Síne agus Feadánra Ribeach Cruach Dhosmálta 304, tá súil againn ó chroí caidreamh gnó maith agus fadtéarmach a bhunú le do chuideachta measúil tríd an deis seo, bunaithe ar chomhionannas, ar shochar frithpháirteach agus ar ghnó bua-bua as seo amach go dtí an todhchaí. “Is í do shástacht ár sonas”.
Raon déantúsaíochta:
feadán corna cruach dhosmálta
corna feadáin cruach dhosmálta
feadánra coil cruach dhosmálta
píopa corna cruach dhosmálta
soláthraithe feadán coil cruach dhosmálta
monaróirí feadán coil cruach dhosmálta
corna píopa cruach dhosmálta
Úsáidtear feadán beag cruach dhosmálta, ribeach cruach dhosmálta go forleathan i gcóireáil leighis, snáithín optúil, déanamh pinn, táirgí táthú leictreonacha, comhpháirt cábla solais, bia, seanré, déiríocht, deoch, cógaslann agus bithcheimic, is féidir faid éagsúla a sholáthar de réir iarrataí.
Feadáin ribeach le toll uasta de 0.0158 orlach, ar fáil i raon leathan cruach dhosmálta. Is sainairíonna feadáin ribeach Sandvik lamháltais dhian, agus tá dromchla istigh na bhfeadán saor ó ola, ramhar agus cáithníní eile. Cinntíonn sé seo, mar shampla, sreabhadh optamaithe agus cothrom leachtanna agus gás ón braiteoir go dtí an ionstraim tomhais.
Tá feadánra coiled cruach dhosmálta ar fáil i raon foirmeacha táirgí éagsúla ag brath ar riachtanais an chustaiméara. Déanann Licancheng sihe stainless steel material táirgí feadán táthaithe agus gan uaim a mhonarú. Is iad na gráid chaighdeánacha 304 304L 316L (UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625) Tá gráid eile cruach dhosmálta i ndéphléacsach agus sárdhúphléacsach agus cóimhiotal nicil ar fáil ar iarratas.
Trastomhas ó 3mm (0.118'') go 25.4mm (1.00'') OD. Tiús balla ó 0.5mm (0.020'') go 3mm (0.118''). Is féidir feadánra a sholáthar i riocht píopa rialaithe cruach dhosmálta annealaithe nó fuaroibrithe.
Sonraíocht
| Branda | CRUACH dhosmálta Liaocheng Sihe |
| Tiús | 0.1-2.0mm |
| Trastomhas | 0.3-20mm (caoinfhulaingt: ±0.01mm) |
| Grád Cruach Dhosmálta | 201,202,304,304L,316L,317L,321,310s,254mso,904L,2205,625 srl. |
| Críochnú Dromchla | Tá an taobh istigh agus an taobh amuigh araon geal-annealaithe, glanadh, agus gan uaim, gan aon sceitheanna. |
| Caighdeánach | ASTM A269-2002.JIS G4305/ GB/T 12770-2002GB/T12771-2002 |
| Fad | 200-1500m in aghaidh an choil, nó Mar is gá don chustaiméir |
| Méid stoic | 6*1mm, 8*0.5mm, 8*0.6mm, 8*0.8mm, 8*0.9mm, 8*1mm, 9.5*1mm, 10*1mm, srl. |
| Teastas | ISO&BV |
| Bealach pacála | Málaí fite, málaí plaisteacha srl. |
| Raon feidhme | a úsáidtear go forleathan i dtionscal an bhia, i dtrealamh dí, i meaisín beorach, i malartóir teasa, i gcóras soláthair bainne/uisce, i dtrealamh leighis, i bhfuinneamh gréine, i dtrealamh leighis, san eitlíocht, san aeraspás, sa chumarsáid, san ola agus i dtionscail eile |
| Nóta | Glactar le Lipéad OEM / ODM / Ceannaitheora. |
Comhdhéanamh ceimiceach:
| Feadán ribeach cruach dhosmálta 316 | |||||||||
| Grád | UNS | C | Cr | Ni | Mo | Daoine eile | |||
| uasmhéid | |||||||||
| TP 316L | S31600/ S31603 | 0.03 | 17.5 | 13 | 2.1 | 0.1 | |||
| Airíonna meicniúla | |||||||||
| Grád | Neart toraidh, | Neart teanntachta, | Síneadh | ||||||
| psi (MPa) | psi (MPa) | % | |||||||
| TP 316L | 32,000 (220) | 75,000 (515) | 35 | ||||||
| Airíonna creimeadh | |||||||||
| Grád | UNS | RÉAMH1) | CPT2) F (°C) | Uasmhéid H2S3) | CO24) | ||||
| TP 316L | S31600/S31603 | 24 | 95 (35) | Gan teorainn | + | ||||
▼Grád ábhair feadánra/feadánra coilte cruach dhosmálta:
| 304 | X 5 CrNi 18 10 | 1.4301 | Z 6 CN 18-09 | SUS 304 | X 5 CrNi 1810 | 23 32 | 304S15 | X 6 CrNi 18 10 | X 6 CrNi 19-10 | 08KH18N10 |
| X 5 CrNi 18 12 | 1.4303 | 304S16 | 06KH18N11 | |||||||
| 304 N | SUS 304N1 | X 5 CrNiN 1810 | ||||||||
| 304 H | SUS F 304H | X 8 CrNi 1910 | X 6 CrNi 19-10 | |||||||
| 304 L | X2CrNi1811 | 1.4306 | Z 2 CN 18-10 | SUS 304L | X 2 CrNi 1911 | 23 52 | 304S11 | X3 CrNi1810 | X2 CrNi 19-10 | 03KH18N11 |
| X 2 CrNiN 18 10 | 1.4311 | Z 2 CN 18-10-Az | SUS 304LN | X 2 CrNiN 1811 | 23 71 | |||||
| 305 | Z 8 CN 18-12 | SUS 305 | X 8 CrNi 1812 | 23 33 | 305S19 | X 8 CrNi 18 12 | X 8 CrNi 18-12 | |||
| Z 6 CNU 18-10 | SUS XM7 | X 6 CrNiCu 18 10 4 Kd | ||||||||
| 309 | X 15 CrNiS 20 12 | 1.4828 | Z 15 CN 24-13 | SUH 309 | X 16 CrNi 2314 | 309S24 | X 15 CrNi 23 13 | |||
| 309 S | SUS 309S | X6 CrNi 2314 | X 6 CrNi 22 13 | |||||||
| 310 | X 12 CrNi 25 21 | 1.4845 | SUH 310 | X 22 CrNi 2520 | 310S24 | 20KH23N18 | ||||
| 310 S | X 12 CrNi 25 20 | 1.4842 | Z 12 CN 25-20 | SUS 310S | X 5 CrNi 2520 | 23 61 | X 6 CrNi 25 20 | 10KH23N18 | ||
| 314 | X 15 CrNiSi 25 20 | 1.4841 | Z 12 CNS 25-20 | X 16 CrNiSi 2520 | X 15 CrNiSi 25 20 | 20KH25N20S2 | ||||
| 316 | X 5 CrNiMo 17 12 2 | 1.4401 | Z 6 CND 17-11 | SUS 316 | X 5 CrNiMo 1712 | 23 47 | 316S31 | X 6 CrNiMo 17 12 2 | X 6 CrNiMo 17-12-03 | |
| 316 | X 5 CrNiMo 17 13 3 | 1.4436 | Z 6 CND 17-12 | SUS 316 | X 5 CrNiMo 1713 | 23 43 | 316S33 | X 6 CrNiMo 17 13 3 | X 6 CrNiMo 17-12-03 | |
| 316 F | X 12 CrNiMoS 18 11 | 1.4427 | ||||||||
| 316 N | SUS 316N | |||||||||
| 316 H | SUS F 316H | X 8 CrNiMo 1712 | X 5 CrNiMo 17-12 | |||||||
| 316 H | X 8 CrNiMo 1713 | X 6 CrNiMo 17-12-03 | ||||||||
| 316 L | X 2 CrNiMo 17 13 2 | 1.4404 | Z 2 CND 17-12 | SUS 316L | X 2 CrNiMo 1712 | 23 48 | 316S11 | X 3 CrNiMo 17 12 2 | X 2 CrNiMo 17-12-03 | 03KH17N14M2 |
| X 2 CrNiMoN 17 12 2 | 1.4406 | Z 2 CND 17-12-Az | SUS 316LN | X 2 CrNiMoN 1712 | ||||||
| 316 L | X 2 CrNiMo 18 14 3 | 1.4435 | Z 2 CND 17-13 | X 2 CrNiMo 1713 | 23 53 | 316S13 | X 3 CrNiMo 17 13 3 | X 2 CrNiMo 17-12-03 | 03KH16N15M3 | |
| X 2 CrNiMoN 17 13 3 | 1.4429 | Z 2 CND 17-13-Az | X 2 CrNiMoN 1713 | 23 75 | ||||||
| X 6 CrNiMoTi 17 12 2 | 1.4571 | Z6 CNDT 17-12 | X 6 CrNiMoTi 1712 | 23 50 | 320S31 | X 6 CrNiMoTi 17 12 2 | X 6 CrNiMoTi 17-12-03 | 08KH17N13M2T | ||
| 10KH17N13M2T | ||||||||||
| X 10 CrNiMoTi 18 12 | 1.4573 | X 6 CrNiMoTi 1713 | 320S33 | X 6 CrNiMoTI 17 13 3 | X 6 CrNiMoTi 17-12-03 | 08KH17N13M2T | ||||
| 10KH17N13M2T | ||||||||||
| X 6 CrNiMoNb 17 12 2 | 1.4580 | Z 6 CNDNb 17-12 | X 6 CrNiMoNb 1712 | X 6 CrNiMoNb 17 12 2 | 08KH16N13M2B | |||||
| X 10 CrNiMoNb 18 12 | 1.4583 | X₆CrNiMoNb 1713 | X 6 CrNiMoNb 17 13 3 | 09KH16N15M3B | ||||||
| 317 | SUS 317 | X 5 CrNiMo 1815 | 23 66 | 317S16 | ||||||
| 317 L | X 2 CrNiMo 18 16 4 | 1.4438 | Z 2 CND 19-15 | SUS 317L | X 2 CrNiMo 1815 | 23 67 | 317S12 | X 3 CrNiMo 18 16 4 | ||
| 317 L | X 2 CrNiMo 18 16 4 | 1.4438 | Z 2 CND 19-15 | SUS 317L | X 2 CrNiMo 1816 | 23 67 | 317S12 | X 3 CrNiMo 18 16 4 | ||
| 330 | X 12 NiCrSi 36 16 | 1.4864 | Z 12NCS 35-16 | SUH 330 | ||||||
| 321 | X 6 CrNiTi 18 10 | 1.4541 | Z 6 CNT 18-10 | SUS 321 | X 6 CrNiTi 1811 | 23 37 | 321S31 | X 6 CrNiTi 18 10 | X 6 CrNiTi 18-11 | 08KH18N10T |
| X 12 CrNiTi 18 9 | 1.4878 | |||||||||
| 321 H | SUS 321H | X 8 CrNiTi 1811 | 321S20 | X 7 CrNiTi 18-11 | 12KH18N10T | |||||
| 329 | X 8 CrNiMo 27 5 | 1.4460 | SUS 329J1 | 23 24 | ||||||
| 347 | X 6 CrNiNb 18 10 | 1.4550 | Z 6 CNNb 18-10 | SUS 347 | X 6 CrNiNb 1811 | 23 38 | 347S31 | X 6 CrNiNb 18 10 | X 6 CrNiNb 18-11 | 08KH18N12B |
| 347 H | SUS F 347H | X8 CrNiNb 1811 | X 7 CrNiNb 18-11 | |||||||
| 904L | 1.4939 | Z 12 CNDV 12-02 | ||||||||
| X 20 CrNiSi 25 4 | 1.4821 | |||||||||
| UNS31803 | X 2 CrNiMoN 22 5 | 1.4462 | ||||||||
| UNS32760 | X 3 CrNiMoN 25 7 | 1.4501 | Z 3 CND 25-06Az | |||||||
| 403 | X 6 Cr 13 | 1.4000 | Z 12 C 13 | SUS 403 | X 12 Cr 13 | 23 02 | 403S17 | X 10 Cr 13 | X 6 Cr 13 | 12Kh13 |
| X 10 Cr 13 | 1.4006 | X 12 Cr 13 | ||||||||
| X 15 Cr 13 | 1.4024 | |||||||||
| 405 | X 6 CrAl 13 | 1.4002 | Z 6 CA 13 | SUS 405 | X 6 CrAl 13 | 405S17 | X 6 CrAl 13 | X 6 CrAl 13 | ||
| X 10 CrAl 7 | 1.4713 | Z 8 CA 7 | X 10 CrAl 7 | |||||||
| X 10 CrAl 13 | 1.4724 | X 10 CrAl 12 | 10Kh13SYu | |||||||
| X 10 CrAl 18 | 1.4742 | X 10 CrSiAl 18 | 15Kh18SYu | |||||||
| 409 | X 6 CrTi 12 | 1.4512 | Z 6 CT 12 | SUH 409 | X 6 CrTi 12 | 409S19 | X 5 CrTi 12 | |||
| X2 CrTi 12 | ||||||||||
| 410 | X 6 Cr 13 | 1.4000 | Z 10 C 13 | SUS 410 | X 12 Cr 13 | 23 02 | 410S21 | X 12 Cr 13 | X 12 Cr 13 | 12Kh13 |
| X 10 Cr 13 | 1.4006 | Z 12 C 13 | ||||||||
| X 15 Cr 13 | 1.4024 | |||||||||
| 410 S | X 6 Cr 13 | 1.4000 | Z 6 C 13 | SUS 410S | X 6 Cr 13 | 23 01 | 403S17 | X 6 Cr 13 | 08Kh13 |
Buntáiste cáilíochta:
Ní hamháin le linn an phróisis déantúsaíochta rialaithe ach trí thástáil ar an táirge críochnaithe a chinntítear cáilíocht ár dtáirgí don líne rialaithe san earnáil ola agus gáis. Áirítear ar thástálacha tipiciúla:
1. Tástálacha neamh-millteach
2. Tástálacha hidreastatacha
3. Rialuithe bailchríoch dromchla
4. Tomhais chruinneas toisí
5. Tástálacha lasracha agus cónúcháin
6. Tástáil airíonna meicniúla agus ceimiceacha
Feadán ribeach cruach dhosmálta den mhéid seo a leanas:
| Feadánra ribeach cruach dhosmálta | ||||||||||
| Feadánra ribeach cruach dhosmálta 304 | ||||||||||
| Is féidir linn Grád a tháirgeadh: 316L 304 304L 2205 904L 2507 625 825 MOQ500kgs | ||||||||||
| 0.25*0.08 | 1.4*0.4 | 2.3*0.2 | 3.2*0.25 | 4.5*0.7 | 6*0.45 | 8*0.3 | 11*0.5 | 0.8*0.2 | 10*1 | |
| 0.3*0.1 | 1.5*0.1 | 2.3*0.25 | 3.2*0.3 | 4.5*0.75 | 6*0.5 | 8*0.4 | 11*1 | 0.85*0.175 | 12*0.5 | |
| 0.4*0.1 | 1.5*0.125 | 2.3*0.3 | 3.2*0.35 | 4.5*0.8 | 6*0.6 | 8*0.45 | 11*1.5 | 1.1*0.2 | 12*1 | |
| 0.5*0.1 | 1.5*0.15 | 2.4*0.15 | 3.2*0.4 | 4.5*0.9 | 6*0.7 | 8*0.5 | 11*2 | 1.1*0.3 | 12*1.5 | |
| 0.5*0.125 | 1.5*0.2 | 2.4*0.2 | 3.2*0.5 | 4.5*1 | 6*0.8 | 8*0.6 | 11.1*0.4 | 1.2*0.135 | 12*2.0 | |
| 0.5*0.15 | 1.5*0.25 | 2.4*0.25 | 3.2*0.6 | 4.7*0.2 | 6*0.9 | 8*0.7 | 12*0.2 | 1.6*0.25 · | 12.8*1.6 | |
| 0.6*0.1 | 1.5*0.3 | 2.4*0.3 | 3.2*0.8 | 4.7*0.25 | 6*1.0 | 8*0.8 | 12*0.25 | 1.9*0.1 | 14*0.5 | |
| 0.6*0.125 | 1.5*0.35 | 2.4*0.4 | 3.4*0.5 | 4.7*0.3 | 6*1.2 | 8*0.9 | 12*0.3 | 2*0.3 | 14*1.5 | |
| 0.6*0.15 | 1.5*0.4 | 2.4*0.5 | 3.5*0.15 | 4.8*0.125 | 6*1.25 | 8*1 | 12*0.4 | 2*0.4 | 14*2.0 | |
| 0.63*0.15 | 1.5*0.45 | 2.4*0.6 | 3.5*0.2 | 4.8*0.2 | 6*1.5 | 8*1.2 | 12*0.5 | 2*0.5 | 15*0.5 | |
| 0.7*0.1 | 1.5*0.5 | 2.4*0.7 | 3.5*0.25 | 4.8*0.25 | 6*2 | 8*1.5 | 12*1 | 2*0.6 | 15*1.5 | |
| 0.7*0.125 | 1.6*0.1 | 2.4*0.75 | 3.5*0.3 | 4.8*0.3 | 6.35*0.3 | 8*2 | 12.3*0.4 | 2.5*0.25 | 15*2 | |
| 0.7*0.15 | 1.6*0.125 | 2.4*0.8 | 3.5*0.4 | 4.8*0.5 | 6.35*0.5 | 8*2.5 | 12.7*0.3 | 2.5*0.3 | 16*0.5 | |
| 0.7*0.2 | 1.6*0.15 | 2.5*0.1 | 3.5*0.5 | 5*0.1 | 6.35*0.7 | 8.5*0.2 | 13*0.5 | 2.5*0.5 | 16*1.0 | |
| 0.8*0.1 | 1.6*0.2 | 2.5*0.15 | 3.5*0.55 | 5*0.15 | 6.35*1.0 | 8.5*0.25 | 13*1 | 3*0.5 | 16*1.5 | |
| 0.8*0.125 | 1.6*0.25 | 2.5*0.2 | 3.5*0.7 | 5*0.2 | 6.4*0.225 | 8.5*0.3 | 13*1.5 | 3*0.8 | 16*2.0 | |
| 0.8*0.15 | 1.6*0.3 | 2.5*0.25 | 3.5*0.8 | 5*0.25 | 6.5*0.2 | 8.5*0.4 | 13*2 | 3*1 | 17*1.5 | |
| 0.8*0.2 | 1.6*0.35 | 2.5*0.3 | 3.5*1.0 | 5*0.3 | 6.5*0.25 | 8.5*0.5 | 13.5*0.5 | 4*0.3 | 17*2.0 | |
| 0.8*0.25 | 1.6*0.4 | 2.5*0.35 | 3.5*1.15 | 5*0.35 | 6.5*0.3 | 8.5*1.0 | 14*0.25 | 4*0.5 | 18*1.5 | |
| 0.9*0.1 | 1.65*0.3 | 2.5*0.4 | 3.6*0.15 | 5*0.4 | 6.5*0.4 | 8.5*1.3 | 14*0.3 | 4*1 | 18*2.0 | |
| 0.9*0.15 | 1.7*0.1 | 2.5*0.45 | 3.7*0.15 | 5*0.45 | 6.5*0.5 | 8.5*1.5 | 14*0.5 | 4.8*0.15 | 19*1.5 | |
| 0.9*0.2 | 1.7*0.15 | 2.5*0.5 | 3.7*0.2 | 5*0.5 | 6.5*0.6 | 8.9*1.4 | 14*1 | 5*0.5 | 19*2.0 | |
| 0.9*0.25 | 1.7*0.2 | 2.5*0.6 | 3.7*0.5 | 5*0.6 | 6.5*0.7 | 9*0.2 | 14.2*0.2 | 5*1 | 20*1.0 | |
| 1.0*0.1 | 1.7*0.25 | 2.5*0.65 | 3.8*0.2 | 5*0.7 | 6.5*0.8 | 9*0.25 | 15*0.3 | 5.5*1.75 | 20*1.5 | |
| 1.0*0.125 | 1.7*0.3 | 2.5*0.7 | 3.8*0.25 | 5*0.75 | 6.5*0.9 | 9*0.3 | 15*0.5 | 6*0.15 | 20*2.0 | |
| 1.0*0.15 | 1.8*0.1 | 2.5*0.85 | 3.8*0.3 | 5*0.8 | 6.5*1 | 9*0.4 | 15*1 | 6*0.25 | 20*2.5 | |
| 1.0*0.2 | 1.8*0.15 | 2.6*0.15 | 3.9*0.2 | 5*0.9 | 6.5*1.3 | 9*0.5 | 16*0.5 | 6*0.3 | 21*1.0 | |
| 1.0*0.25 | 1.8*0.2 | 2.6*0.2 | 4*0.1 | 5*1.0 | 6.7*0.5 | 9*0.6 | 16*1 | 6*0.5 | 22*1.5 | |
| 1.0*0.3 | 1.8*0.25. | 2.6*0.3 | 4*0.15 | 5*1.2 | 6.8*0.15 | 9*0.7 | 17*0.5 | 6*0.85 | 25*1.5 | |
| 1.0*0.35 | 1.8*0.3 | 2.6*0.5 | 4*0.2 | 5*1.5 | 7*0.15 | 9*0.8 | 17*1 | 6*1 | 28.6*1.5 | |
| 1.1*0.1 | 1.8*0.35 | 2.65*0.15 | 4*0.25 | 5.2*0.2 | 7*0.2 | 9*0.9 | 18*0.5 | 7*0.3 | ||
| 1.1*0.12 | 1.8*0.4 | 2.7*0.15 | 4*0.3 | 5.2*0.3 | 7*0.25 | 9*1 | 18*1.0 | 7*0.5 | ||
| 1.1*0.125 | 1.9*0.1 | 2.7*0.2 | 4*0.35 | 5.2*0.45 | 7*0.3 | 9*1.5 | 19*0.5 | 7*1.0 | ||
| 1.1*0.15 | 1.9*0.15 | 2.7*0.3 | 4*0.4 | 5.2*0.5 | 7*0.35 | 9*2 | 19*1.0 | 8*0.5 | ||
| 1.1*0.2 | 1.9*0.2 | 2.8*0.15 | 4*0.45 | 5.4*0.2 | 7*0.4 | 9.5*0.25 | 20*0.5 | 8*1 | ||
| 1.1*0.25 | 1.9*0.25 | 2.8*0.2 | 4*0.5 | 5.45*0.275 | 7*0.45 | 9.5*0.3 | 21*0.5 | 9*0.5 | ||
| 1.2*0.1 | 2*0.1 | 2.8*0.25 | 4*0.6 | 5.5*0.15 | 7*0.5 | 9.5*0.5 | 9*1 | |||
| 1.2*0.12 | 2*0.125 | 2.8*0.3 | 4*0.7 | 5.5*0.2 | 7*0.6 | 9.5*0.7 | 10*0.5 | |||
| 1.2*0.125 | 2*0.15 | 2.8*0.5 | 4*0.75 | 5.5*0.25 | 7*0.7 | 9.5*1 | 10*1 | |||
| 1.2*0.15 | 2*0.2 | 2.8*0.7 | 4*0.8 | 5.5*0.3 | 7*0.8 | 9.5*1.5 | ||||
| 1.2*0.2 | 2*0.25 | 2.9*0.3 | 4*0.9 | 5.5*0.4 | 7*0.9 | 10*0.2 | ||||
| 1.2*0.25 | 2*0.3 | 3*0.1 | 4*1.0 | 5.5*0.5 | 7*1.0 | 10*0.25 | ||||
| 1.2*0.3 | 2*0.35 | 3*0.15 | 4*1.25 | 5.5*0.6 | 7*1.2 | 10*0.3 | ||||
| 1.2*0.4 | 2*0.4 | 3*0.2 | 4*1.5 | 5.5*0.7 | 7*1.5 | 10*0.4 | ||||
| 1.3*0.1 | 2*0.45 | 3*0.25 | 4.2*0.2 | 5.5*0.75 | 7*2 | 10*0.5 | ||||
| 1.3*0.12 | 2*0.5 | 3*0.3 | 4.2*0.25 | 5.5*0.8 | 7.5*0.2 | 10*0.6 | ||||
| 1.3*0.125 | 2*0.6 | 3*0.35 | 4.2*0.3 | 5.5*1 | 7.5*0.25 | 10*0.7 | ||||
| 1.3*0.135 | 2*0.7 | 3*0.4 | 4.2*0.4 | 5.6*0.85 | 7.5*0.3 | 10*0.8 | ||||
| 1.3*0.15 | 2.1*0.15 | 3*0.5 | 4.2*0.5 | 5.7*0.2 | 7.5*0.4 | 10*0.9 | ||||
| 1.3*0.175 | 2.1*0.2 | 3*0.6 | 4.3*0.9 | 5.7*0.3 | 7.5*0.5 | 10*1.0 | ||||
| 1.3*0.2 | 2.1*0.25 | 3*0.7 | 4.4*0.45 | 5.8*0.15 | 7.5*0.6 | 10*1.5 | ||||
| 1.3*0.25 | 2.1*0.65 | 3*0.75 | 4.4*0.5 | 5.8*0.2 | 7.5*0.7 | 10*2 | ||||
| 1.3*0.3 | 2.2*0.15 | 3*0.8 | 4.5*0.15 | 5.8*0.5 | 7.5*0.8 | 10*2.5 | ||||
| 1.4*0.1 | 2.2*0.2 | 3*0.9 | 4.5*0.2 | 5.8*0.7 | 7.5*0.9 | 10.3*0.2 | ||||
| 1.4*0.15 | 2.2*0.25 | 3*1.0 | 4.5*0.25 | 6*0.15 | 7.5*1.0 | 10.8*0.2 | bog geal | |||
| 1.4*0.2 | 2.2*0.3 | 3*1.1 | 4.5*0.3 | 6*0.2 | 7.8*0.5 | 11*0.2 | 1.5*0.15 | |||
| 1.4*0.25 | 2.2*0.5 | 3*1.2 | 4.5*0.4 | 6*0.25 | 8*0.15 | 11*0.25 | 2*0.5 | |||
| 1.4*0.3 | 2.3*0.125 | 3.2*0.15 | 4.5*0.5 | 6*0.3 | 8*0.2 | 11*0.3 | 2.5*0.5 | |||
| 1.4*0.35 | 2.3*0.15 | 3.2*0.2 | 4.5*0.6 | 6*0.4 | 8*0.25 | 11*0.4 | 5*0.5 | |||
Feadán coil cruach dhosmálta Feidhmchlár:
- trealamh cuisniúcháin
- galaitheoir,
- seachadadh leachtach gáis
- Comhdhlúthadán
- meaisín dí.
Táirgí gaolmhara
-
Feadán ribeach cruach dhosmálta 304
Ainm táirgí: Feadán ribeach cruach dhosmálta Grád: 201 304 304L 316 316L 904L 310s 2205 2507 625 825 Úsáid: Feadán comhartha ionstraime dinimiciúla, is féidir feadán ribeach cruach dhosmálta 304 a úsáid mar fheadán cosanta sreinge ionstraime uathoibríoch; Líne rialóra optúil beachtais, braiteoirí tionsclaíocha, feadán cosanta líne trealaimh leictreonaigh; Cosaint sábháilteachta ciorcad leictreach, cosaint ribeadáin ionstraime teirmeacha agus tacaíocht inmheánach cábla ardvoltais croí log Méid: OD: 0.25-...
-
Feadán ribeach cruach dhosmálta 304L
Ainm táirgí: Feadán ribeach cruach dhosmálta Grád: 201 304 304L 316 316L 904L 310s 2205 2507 625 825 Úsáid: Feadán comhartha ionstraime dinimiciúla, is féidir feadán ribeach cruach dhosmálta 304 a úsáid mar fheadán cosanta sreinge ionstraime uathoibríoch; Líne rialóra optúil beachtais, braiteoirí tionsclaíocha, feadán cosanta líne trealaimh leictreonaigh; Cosaint sábháilteachta ciorcad leictreach, cosaint ribeadáin ionstraime teirmeacha agus tacaíocht inmheánach cábla ardvoltais croí log Méid: OD: 0.25-...
-
316 feadán ribeach
Ainm táirgí: Feadán ribeach cruach dhosmálta Grád: 201 304 304L 316 316L 904L 310s 2205 2507 625 825 Úsáid: Feadán comhartha ionstraime dinimiciúla, is féidir feadán ribeach cruach dhosmálta 304 a úsáid mar fheadán cosanta sreinge ionstraime uathoibríoch; Líne rialóra optúil beachtais, braiteoirí tionsclaíocha, feadán cosanta líne trealaimh leictreonaigh; Cosaint sábháilteachta ciorcad leictreach, cosaint ribeadáin ionstraime teirmeacha agus tacaíocht inmheánach cábla ardvoltais croí log Méid: OD: 0.25-...
-
Feadán ribeach 316l
Ainm táirgí: Feadán ribeach cruach dhosmálta Grád: 201 304 304L 316 316L 904L 310s 2205 2507 625 825 Úsáid: Feadán comhartha ionstraime dinimiciúla, is féidir feadán ribeach cruach dhosmálta 304 a úsáid mar fheadán cosanta sreinge ionstraime uathoibríoch; Líne rialóra optúil beachtais, braiteoirí tionsclaíocha, feadán cosanta líne trealaimh leictreonaigh; Cosaint sábháilteachta ciorcad leictreach, cosaint ribeadáin ionstraime teirmeacha agus tacaíocht inmheánach cábla ardvoltais croí log Méid: OD: 0.25-...
